Pages: [1]
Author Topic: DELETE  (Read 2135 times)
Razorte
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 70


« on: August 19, 2023, 04:37:08 AM »

DELETE
« Last Edit: July 11, 2024, 06:30:46 AM by Razorte » Logged
Razorte
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 70


« Reply #1 on: August 19, 2023, 06:56:05 AM »

DELETE
« Last Edit: July 11, 2024, 06:30:41 AM by Razorte » Logged
MirXas
Full Member
***

Karma: +2/-6
Offline Offline

Posts: 80



« Reply #2 on: August 20, 2023, 01:25:16 AM »

Your pin is in eeprom, not flash.
Logged
stuydub
Full Member
***

Karma: +25/-12
Offline Offline

Posts: 230


« Reply #3 on: August 20, 2023, 05:39:25 AM »

The can commander 1.4 only gives me "Trying combinations 0X0000" with incrementation.

The dash is 1J0 920 825 A.

In this case the car is a IMMO2 so the ecu doesnt contain a SKC/PIN...you will need a full dump from cluster...select VDO or RB8 from drop down menu in k commander
Logged
Razorte
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 70


« Reply #4 on: August 28, 2023, 07:52:40 AM »

DELETE
« Last Edit: July 11, 2024, 06:30:35 AM by Razorte » Logged
Razorte
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 70


« Reply #5 on: August 28, 2023, 07:53:39 AM »

DELETE
« Last Edit: July 11, 2024, 06:30:31 AM by Razorte » Logged
revoke20
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 25


« Reply #6 on: September 20, 2023, 03:56:16 AM »

eeprom можно выгрузить не снимая приборную панель
Logged
Razorte
Full Member
***

Karma: +1/-19
Offline Offline

Posts: 70


« Reply #7 on: October 04, 2023, 11:54:17 PM »

DELETE
« Last Edit: July 11, 2024, 06:30:25 AM by Razorte » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)