Hello Guys at first sorry for my English iam from Germany.
I have a CobraRTP Emulator i solderd the Adapter connected everything and put the Emulator into the Ecu only the Usb cable comes out from a small hole.
After Flashing the Emulator i tried to start the Car but it have a bad idle and the throttlebody opens and close permanently (fast) and the engine dies.
So i opened my ecu again and searched for faults but.
After hours of trying i connected the ecu without the body into the csr and the Emulator next to the Ecu the csrs starts and run fine.
When i take the Emulator and hold i near of the the ecu without touching anything the engine dies(in the position where its fixed)
Now i dont now what to do i really dont want to leave the Emulator outside the Ecu because of water and dirt .
I hope someone who habe expirience with Emulator can help me

Best wishes

Since you havent enlighted us what ECU you are using, its difficult to help.

I run several CobraRTPs without any problems in Siemens MS4* series ECUs.

Yes, it should.

Hello.
How to connect tunerpro to the emulator. I can't find a tutorial explaining how to do it?

be_strong
Its on their website.
Go to Support and then Manuals, Drivers, Software, files.
(https://cobrartp.com/en/downloads/)
On the right side are Manuals.

Sorry for bad Englisch, I am from Germany.

I hope i could help.