Pages: [1]
Author Topic: 679 Wheel Horsepower Stock Bore 1.8t Dyno Runs  (Read 31829 times)
_nameless
Hero Member
*****

Karma: +330/-460
Offline Offline

Posts: 2743



« on: October 13, 2023, 11:25:09 AM »

I collaborate with a small team daily, and receiving feedback is always appreciated. Remote tuning certainly presents its challenges, but it's exceptionally rewarding when a customer is genuinely satisfied with our work.
Over the past few weeks, I've been fine-tuning this car remotely. It boasts some impressive specs, including 1700cc injectors, E85 fuel, a stock bore, piston rod combo, an Aeb head, 2.7t throttle body, stock intake valves, inconel exhaust valves, dual valve springs and retainers, CAT 282°/269° cams, a GTX3584 turbo, Cast China top mount turbo manifold, head studs, and a 06A block with stock main bolts and main caps.
Our initial runs yielded just over 600 horsepower, precisely 604. As we gradually increased the boost, we hit 644. Our quest for peak performance, coupled with a touch of timing optimization on the top end, pushed us to an incredible 679 horsepower at the tires! All of this was achieved using a stock ECU, without a MAF sensor, and with a REAL speed density patch, no bullshit alpha-n. We had an engine mount failure and called it, that was also the reason for such a choppy torque curve. Solid mounts are being installed and next weekend we are going to crack 700...


Dyno Pulls
https://www.youtube.com/watch?v=FYaYiRqfTdY

https://www.youtube.com/watch?v=UgPE8kTi8Qo


« Last Edit: October 13, 2023, 11:26:47 AM by _nameless » Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
justinvw2646
Full Member
***

Karma: +17/-3
Offline Offline

Posts: 192


« Reply #1 on: October 17, 2023, 05:43:39 PM »

Well done. Thanks for sharing!
Logged
_nameless
Hero Member
*****

Karma: +330/-460
Offline Offline

Posts: 2743



« Reply #2 on: October 19, 2023, 08:05:57 AM »

Well done. Thanks for sharing!
Thanks man
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)