Hello there, from my last question i switched for my mk2 1.8t swap from narrowband apy ECU to a BAM ECU 8N0906018CB 0003
i´ve tried my best to find the correct values in the binary and cross checked from other ECU / WINOLS Demos
What i tried:
11/17/2023 13:09:19 Scalar: CDLSH changed from 1.00 (0x01) to 0.00 (0x00).
11/17/2023 13:13:59 Scalar: CDTES changed from 1.00 (0x01) to 0.00 (0x00).
11/27/2023 14:43:04 Scalar: CWCS changed from 100.00 (0x64) to 0.00 (0x00).
11/27/2023 14:43:32 Scalar: CWCSER changed from 1.00 (0x01) to 0.00 (0x00).
11/27/2023 14:47:42 Scalar: CWCANKBI changed from 6.00 (0x06) to 0.00 (0x00).
11/27/2023 14:51:41 Scalar: CW_CAN_R_0__A changed from 70.00 (0x46) to 0.00 (0x00).
11/27/2023 14:51:44 Scalar: CW_CAN_R_1__A changed from 172.00 (0xAC) to 0.00 (0x00).
11/27/2023 14:51:46 Scalar: CW_CAN_R_2__A changed from 172.00 (0xAC) to 0.00 (0x00).
11/27/2023 14:51:55 Scalar: CW_CAN_R_3__A changed from 172.00 (0xAC) to 0.00 (0x00).
11/27/2023 15:03:05 Scalar: CDTANKL changed from 1.00 (0x01) to 0.00 (0x00).
Whats strange to me is that CWCS is on 100, from the definition i found/got it was on 1A48E.
so the DTC´s i get on the bench are:
DTC: P1523 Status: 0x64 Crash Signal from Airbag Control Unit range/performance
DTC: P0600 Status: 0x68 Serial Communication Link (Data Bus) Message Missing
DTC: P0600 Status: 0x68 Serial Communication Link (Data Bus) Message Missing
DTC: P0600 Status: 0x64 Serial Communication Link (Data Bus) Message Missing
any idea what was wrong with my frist attemp
