Pages: [1]
Author Topic: boost actual higher in deceleration  (Read 1572 times)
vvt18
Full Member
***

Karma: +2/-74
Offline Offline

Posts: 139


« on: December 02, 2023, 12:00:25 PM »

After change the hardware setup with an external wastegate  i see in log some issues/problems:
1. After get the foot from acceleration pedal the boost increase very high than desire. (after sample 530 in log) . This was in 4th gear . Can be the log delay between 2 variables? Or DV is very slow?
2. load request it is cut by something but hbn arx ldpbn all are maxed , retards doesn't exist . (after sample 300) . this in 3rd gear. I don't have any intervention torque/temperature/boost!

Please no comment about load specified is so high than actual , because before external wastagte was aproximatly the same.
File is made 5120!
Thanks

« Last Edit: December 03, 2023, 06:34:03 AM by vladvlad » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)