NefMoto > ECU Files > Original ECU Files > Original ECU File Requests > 8J0907115L original file // full backup file
Pages: [1]
« previous next »
Author Topic: 8J0907115L original file // full backup file  (Read 4894 times)
tobi.soso
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9
« on: December 27, 2023, 11:24:20 PM »
Hello,
I destroyed my ecu.
Unfortunately no one could help me, so I bought a new one - yes new - for €1500.
The delivery time is long so I would like to try something on the broken one.
I got two original files, but they are very different.

Can someone send me a checked original file?
Or better a full backup file.
If you like you can also check the eeprom file.

Thanks for your help

Audi TT 8J 2.0 TFSI
MED17.5
engine: CCZA
Audi: 8J0907115L
Bosch: 0261201881
Version: 0020

Regards, Tobi
Logged
tobi.soso
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9
« Reply #1 on: January 05, 2024, 11:22:18 AM »
Can someone help me,  please?  full backup with Flash + eeprom
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #2 on: January 05, 2024, 01:49:47 PM »
I suggest posting request in paid services.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #3 on: January 05, 2024, 10:53:10 PM »
The price for brand new ecu ist 1300€ in the moment and it seems you are located in germany. There are a lot of advanced "tuner" workshops.

Anyway how did you destroy it? I expect playing with china tools...?
Logged
tobi.soso
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9
« Reply #4 on: January 06, 2024, 12:00:18 AM »
Quote from: cherry on January 05, 2024, 10:53:10 PM
The price for brand new ecu ist 1300€ in the moment and it seems you are located in germany. There are a lot of advanced "tuner" workshops.

Anyway how did you destroy it? I expect playing with china tools...?

I know it was my fault.  First I read and flashed the ecu with kess clone on obd.  The car started without errors.  After four days the car no longer started.  The ecu was no longer accessible with vcds.  Next I tried with FC CG200 on bench.  That didn `t work.  I could only read the ecu with pcm flash at bootmode.  But I think the data is bad.

the seller of the new ecu is "oemvwshop"
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1601
« Reply #5 on: January 06, 2024, 07:01:49 AM »
Is the ecu destroyed or is it just not working in the car and not reachable via obd?
bench and boot is working?
Logged
tobi.soso
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9
« Reply #6 on: January 06, 2024, 08:18:28 AM »
I think it's broken.  It is not possible to read on bench or OBD.  I think the yellow converters are broken. They are a little brown.
Regards
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035
« Reply #7 on: January 25, 2024, 08:48:19 AM »
Bench and bootmode hardware wise use the same logic for communications.
The only exception (depending on TPROT version) is that in some cases bootmode does not require signals on the crank/cam sensors.

So I would say most likely the ECU is not physically broken.
Also on TriCore you can't just write a full backup in, because the EEPROM is encrypted by the OTP.

Simplest way is probably make the whole cal block 0xFF and then try if it goes into CBOOT, and most likely you can just flash a stock FRF into it.

Or you can adapt new ECU to the car, for that you need someone with ODIS and GeKo access.
« Last Edit: January 25, 2024, 08:50:17 AM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
tobi.soso
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 9
« Reply #8 on: January 26, 2024, 10:22:38 PM »
Hello,
finally I bought a used Med17.5 and removed the immobilizer, because the waiting time for the new ecu was very long. 
It was able to read the broken ecu with another tool in boot mode.That's the only way to get the pin code. 
In this way I was able to train the new ecu with vcds to my car and I was happy.

Regards Tobi
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 12:18:48 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)