Hardware Requirements For E85 DI EA113?

Pages: [1]

« previous next »

Author

Topic: Hardware Requirements For E85 DI EA113? (Read 760 times)

Spen Holder

Jr. Member

Karma: +2/-6
Offline

Offline

Posts: 33

	Hardware Requirements For E85 DI EA113? « on: January 04, 2024, 01:07:27 AM »

Straight to the point, Id like to convert my mk6 r to e85, what would be the required hardware upgrades to achieve this? LPFP, HPFP, Injectors? Its still stock turbo at the moment, however I've been looking at the g25-660s recently and I would like to have adequate fueling for about 30psi or so on that turbo. What would you guys recommend?


	Logged

Spen Holder

Jr. Member

Karma: +2/-6
Offline

Offline

Posts: 33

	Re: Hardware Requirements For E85 DI EA113? « Reply #1 on: January 04, 2024, 01:14:42 AM »

Also, is MPI an option on these? For example can I use the Stock DI fueling and get the extra fuel by MPI? Kess identified the ecu as a MED9.1 if that helps? I was looking at after market intake manifolds and I noticed some are drilled for MPI.


	Logged

prj

Hero Member

Karma: +1072/-480
Offline

Offline

Posts: 6034

	Re: Hardware Requirements For E85 DI EA113? « Reply #2 on: January 04, 2024, 01:54:55 AM »

You need to add MPI injectors.
SkOls made a software that can drive them as well in batch mode and read ethanol content from sensor.

But no idea if he sells that or not.


	Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches

Spen Holder

Jr. Member

Karma: +2/-6
Offline

Offline

Posts: 33

	Re: Hardware Requirements For E85 DI EA113? « Reply #3 on: January 04, 2024, 02:00:49 AM »

Thanks for the info, Ill look into it.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 22, 2024, 06:03:32 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search