LAMFA axis not going from 50%

Pages: [1]

« previous next »

Author

Topic: LAMFA axis not going from 50% (Read 975 times)

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	LAMFA axis not going from 50% « on: January 13, 2024, 02:26:04 AM »

Hi,
I need help with LAMFA X axis. It's not going from 50%. Map definitions and values attached.


	Logged

Audi A6 C5 1.8T

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: LAMFA axis not going from 50% « Reply #1 on: January 13, 2024, 02:27:19 AM »

I've viewed other posts, but their settings doesn't seem to work. Car is 4B0906018CA


	Logged

Audi A6 C5 1.8T

IamwhoIam

Hero Member

Karma: +52/-115
Offline

Offline

Posts: 1070

	Re: LAMFA axis not going from 50% « Reply #2 on: January 13, 2024, 02:53:56 AM »

So what? change the axis scaling to be what you think you need. LOL


	Logged

I have no logs because I have a boost gauge (makes things easier)

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: LAMFA axis not going from 50% « Reply #3 on: January 13, 2024, 03:42:27 AM »

Quote from: IamwhoIam on January 13, 2024, 02:53:56 AM

So what? change the axis scaling to be what you think you need. LOL

So it doesn’t matter what the map states, the value used in ECU is always 50,60,70,80,90,97.5? It sounds a bit strange.
Also, I can't scale it from 50 to 100. The original data does not have that charactristic.


« Last Edit: January 13, 2024, 05:57:15 AM by chito »	Logged

Audi A6 C5 1.8T

JeanAwt

Full Member

Karma: +10/-12
Offline

Offline

Posts: 241

	Re: LAMFA axis not going from 50% « Reply #4 on: January 13, 2024, 06:54:19 AM »

hi, why do you want to modify from 50%? a big turbo assembly? precise partial load settings? I have the same engine same file and I'm curious yes


	Logged

A4 B5 avant 1.8T 2000 NO QUATTRO

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: LAMFA axis not going from 50% « Reply #5 on: January 13, 2024, 07:14:45 AM »

Quote from: JeanAwt on January 13, 2024, 06:54:19 AM

hi, why do you want to modify from 50%? a big turbo assembly? precise partial load settings? I have the same engine same file and I'm curious yes

Been viewing different posts, seems like LAMFA in everybody's car is defined from 50 to 100. Including s4wiki and this community project https://myaudis4.com/stage-1/
If I set the map right, it'll be the difference betweeen ME7.1 and ME7.5 I guess. So in ME7.5, LAMFA's X axis sample points are from 85 to 100


	Logged

Audi A6 C5 1.8T

Blazius

Hero Member

Karma: +89/-40
Offline

Offline

Posts: 1282

	Re: LAMFA axis not going from 50% « Reply #6 on: January 13, 2024, 01:08:25 PM »

Set it to whatever you want, it does not matter what its in there from factory.. hell it can even be 0 to 1%

And there is no point setting it to 50% or so because you will have shit fuel economy like that. There is a reason the 7.5 file is like this.


	Logged

chito

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 25

	Re: LAMFA axis not going from 50% « Reply #7 on: January 13, 2024, 04:21:41 PM »

Quote from: Blazius on January 13, 2024, 01:08:25 PM

Thank you very much. Cheesy


	Logged

Audi A6 C5 1.8T

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 25, 2024, 12:06:00 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search