Pages: [1]
Author Topic: ME7 - Oil Level Sensor Delete  (Read 4279 times)
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 123


« on: July 15, 2012, 11:10:52 AM »

The Oil level sensor on the R32/TT platform is a powered sensor, so just resistoring it out doesn't work.

ITs common on the 1.8T to switch to steel bottom pans which don't have the bosses in the metal to mount the sensor.

I am trying to figure out where in the ECU code it might be possible to delete this sensor but am not sure where to begin. I was wondering if anyone has done this with success ?

Thanks
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654


« Reply #1 on: July 16, 2012, 08:26:16 AM »

The Oil level sensor on the R32/TT platform is a powered sensor, so just resistoring it out doesn't work.

Oil level sensor connects to instrument cluster.
Sensor error handler is inside cluster software.
ECU can (not must) recieve oil level information via CAN-bus and custer based CAN-Gatway
 
Logged
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 123


« Reply #2 on: July 17, 2012, 04:41:11 AM »

so it would need to be coded out of the cluster rather than the ECU ?
Logged
ejg3855
Full Member
***

Karma: +6/-0
Offline Offline

Posts: 123


« Reply #3 on: December 05, 2012, 12:00:50 PM »

anyone ?

suggestions or guidance on how to do this?
Logged
nokiafix
Full Member
***

Karma: +19/-2
Offline Offline

Posts: 124


« Reply #4 on: December 06, 2012, 09:23:50 AM »

Coding via VCDS?  I have never tried it before but been told thats the way to do it, so might be worth looking into
Nick
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 16 queries. (Pretty URLs adds 0s, 0q)