Pages: [1]
Author Topic: DTC removal ECM relay MED 9.1 ​  (Read 880 times)
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 16


« on: February 16, 2024, 07:38:15 AM »

Hello everyone.
I have a problem finding the error code 001672 ECM (J271) P0688 - 004 - open circuit.
I would like to disable the ECM diagnostics completely as I have an anti-theft system installed on this relay circuit. Someone tried to help me before because there were two DTCs, at this point there was only one left.
Can anyone help ? Thank you
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #1 on: February 16, 2024, 09:09:53 PM »

Because you asked nicely
Logged

Giving your mom a tuneup
pompak
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 16


« Reply #2 on: February 18, 2024, 07:01:45 PM »

It works, the DTC no longer shows. Thank you !
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)