NefMoto > General > General Discussion > Dsg Dq250 KessV2 Error
Pages: [1]
« previous next »
Author Topic: Dsg Dq250 KessV2 Error  (Read 6425 times)
K-Performace
Newbie
*

Karma: +2/-1
Offline Offline

Posts: 14
« on: March 12, 2024, 02:55:03 PM »
Hello, I have a big problem and I hope someone can help.
I've already written my Dsg Dq250 a few times with kessv2, but this time there seemed to be a problem. Kess showed me that the ECU was written correctly, but the DSG is no longer recognized by the car and when I switch it on I only hear a clicking noise that is repeated 5 times. it can no longer be reached. It also no longer finds VCDs.
Logged
overspeed
Sr. Member
****

Karma: +21/-5
Online Online

Posts: 388
« Reply #1 on: March 12, 2024, 02:57:26 PM »
probably CKS error... I guess bench or at last case boot to recover
Logged
K-Performace
Newbie
*

Karma: +2/-1
Offline Offline

Posts: 14
« Reply #2 on: March 12, 2024, 03:01:30 PM »
many thanks for the quick response.
what is a case boot?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #3 on: March 12, 2024, 03:36:38 PM »
What type is your DQ250?
If it's Cxx, you're fucked.

Otherwise buy PCMFlash and this module:
https://ecutools.eu/chip-tuning/pcmflash/module-58/

Also problem is not checksum. It will go to bootloader with wrong checksum.
The problem is you screwed up some axis or definition of a map.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471
« Reply #4 on: March 15, 2024, 01:26:00 AM »
For dq250 checksum doesn't matter.
I think you interrupt the writing or you flash it with other firmware from other dq250 mechatronic model. For first option you can recover in boot mode , for second....throw it to the trash.
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #5 on: March 15, 2024, 03:17:28 AM »
Quote from: tao13 on March 15, 2024, 01:26:00 AM
For dq250 checksum doesn't matter.
I think you interrupt the writing or you flash it with other firmware from other dq250 mechatronic model. For first option you can recover in boot mode , for second....throw it to the trash.

Not correct info
Exx, Fxx and MQB can always be recovered in boot if they were flashed by OBD.
Interrupting flashing - nothing happens. ECU goes to bootloader.

In his situation the checksum is correct, but the content of the OBD flashable ECU areas is not.
It tries to boot but crashes over and over again, in this case possible only boot recovery. But for CXX there are no boot protocols in any tool, so that one goes to trash.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #6 on: March 15, 2024, 07:11:44 AM »
I/O Terminal claims it can do a full read from CXX MPC555 versions. Not sure if this is still working if tcu is already bricked. Anyway it´s also possible to r/w CXX via BDM, but for sure you need to open it. Seems it´s a foil pcb with bondings etc, so maybe it´s broken after opening...
Logged
cherry
Sr. Member
****

Karma: +26/-2
Offline Offline

Posts: 260
« Reply #7 on: March 15, 2024, 07:14:38 AM »
Here is a old picture.
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #8 on: March 15, 2024, 07:15:42 AM »
Yeah it's certainly possible to BDM it, but probably beyond the guys skill level.
If IO Terminal has implemented SBOOT on CXX then that's a reasonable way to do it.

In the end, used mechatronic units like these are cheap these days.
If you brick a CXX, might as well just get a EXX or FXX instead. If you'd get a new one from the dealer it'd be an EXX or FXX anyway.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471
« Reply #9 on: March 15, 2024, 08:25:09 AM »
PRJ , if he wrote a cxx with exx or fxx file.....what happen? Can be recover?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #10 on: March 15, 2024, 10:28:04 AM »
Quote from: tao13 on March 15, 2024, 08:25:09 AM
PRJ , if he wrote a cxx with exx or fxx file.....what happen? Can be recover?

I don't think you can do that - it will probably not complete the write.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 471
« Reply #11 on: March 15, 2024, 11:29:18 AM »
THANKS for answer!
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 07:13:12 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)