NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > D-box similar config to M-box?
Pages: [1]
« previous next »
Author Topic: D-box similar config to M-box?  (Read 1918 times)
maxb5nz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« on: March 13, 2024, 07:36:42 PM »
Hi fellas,
Attempting to start doing some logs, never done it before.
I Have a D-box ecu, mate of mine said it may not have parameters for rear o2 sensors.

Could someone please shed some light on if my ecu will log wide band.

Thanks!
Logged
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5840
« Reply #1 on: March 14, 2024, 05:06:19 AM »
There is no 2.7T ecu with wideband.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
IamwhoIam
Hero Member
*****

Karma: +44/-101
Offline Offline

Posts: 1034
« Reply #2 on: March 14, 2024, 06:33:11 AM »
D box ECU doesn't have rear O2 sensors
Logged
I have no logs because I have a boost gauge (makes things easier)
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5840
« Reply #3 on: March 14, 2024, 07:19:02 AM »
If you mean that you want to connect an aftermarket wideband to rear o2, then you can do that.
Check what the pinout is for lambda signal, it will be unpopulated in the connector, you can just put the wire there directly.

The ECU inside has all of this connected and you can log the variables.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
maxb5nz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #4 on: March 16, 2024, 06:14:34 PM »
Quote from: prj on March 14, 2024, 07:19:02 AM
If you mean that you want to connect an aftermarket wideband to rear o2, then you can do that.
Check what the pinout is for lambda signal, it will be unpopulated in the connector, you can just put the wire there directly.

The ECU inside has all of this connected and you can log the variables.

Hey mate, thanks for the response.
I have got it all up and running, I'm running a 3bar map sensor, is there an expression I need to add?
Logged
prj
Hero Member
*****

Karma: +915/-427
Offline Offline

Posts: 5840
« Reply #5 on: March 17, 2024, 02:58:05 AM »
Not sure what you mean by "expression".

Also the ECU can't read above 2560mbar without 5120 patch, so your 3 bar sensor is most likely useless.
Logged
PM's will not be answered, so don't even try.
Log your car properly.
maxb5nz
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3
« Reply #6 on: March 17, 2024, 04:00:57 AM »
Just connected to the ME7 Flasher and it says 8D0907551M
Logged
_nameless
Hero Member
*****

Karma: +323/-449
Offline Offline

Posts: 2694
« Reply #7 on: March 17, 2024, 05:46:21 AM »
seems as it was already swapped. So this should be really easy for you
Logged
If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 27, 2024, 11:24:03 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 16 queries. (Pretty URLs adds 0s, 0q)