Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Data Logging
>
vehical maf limit
Pages: [
1
]
« previous
next »
Author
Topic: vehical maf limit (Read 3603 times)
lgtmelo
Full Member
Karma: +2/-13
Online
Posts: 125
vehical maf limit
« on: March 18, 2024, 08:05:34 AM »
hey, my MSHFMTP goes up to 2058kg/h which is 571.67g/s. im wondering whats the reading limit on bosch 079133471 maf (s5 4.2). initially i thought a 364g/s cap was due to vcds logging but i just got vehical and it shows the same value as max. is this an ECU cap?
Logged
prj
Hero Member
Karma: +1072/-480
Offline
Posts: 6035
Re: vehical maf limit
« Reply #1 on: March 18, 2024, 11:35:12 AM »
The real question is which value you are logging.
There is probably a single byte value and a word value.
Logged
PM's will not be answered, so don't even try.
Log your car properly
-
WinOLS database
-
Tools/patches
lgtmelo
Full Member
Karma: +2/-13
Online
Posts: 125
Re: vehical maf limit
« Reply #2 on: March 18, 2024, 11:46:21 AM »
Group[002][4] Air mass/intake manifold pressure/air mass 2 g/s
FR says 10 mshfm_w Luftmassenfluß SY_HFM>0 g/s 25 var 0 ... 364 g/s (for med9.1, best i got)
«
Last Edit: March 18, 2024, 11:48:00 AM by lgtmelo
»
Logged
prj
Hero Member
Karma: +1072/-480
Offline
Posts: 6035
Re: vehical maf limit
« Reply #3 on: March 21, 2024, 11:39:11 AM »
Basic obviously has diagnostic limits.
Logged
PM's will not be answered, so don't even try.
Log your car properly
-
WinOLS database
-
Tools/patches
lgtmelo
Full Member
Karma: +2/-13
Online
Posts: 125
Re: vehical maf limit
« Reply #4 on: March 22, 2024, 11:12:37 AM »
from what i gathered, every maf measurement block variable is capped at 364. so the only way to actually get it would be to map the actual mshfm_w address and log it directly. if i ever manage to disassemble this thing i will post something here
Logged
IamwhoIam
Hero Member
Karma: +52/-114
Offline
Posts: 1070
Re: vehical maf limit
« Reply #5 on: March 22, 2024, 11:27:27 AM »
Quote from: lgtmelo on March 22, 2024, 11:12:37 AM
from what i gathered, every maf measurement block variable is capped at 364. so the only way to actually get it would be to map the actual mshfm_w address and log it directly. if i ever manage to disassemble this thing i will post something here
You don't need to disassemble, just pay and use VehiCAL advanced and you'll be able to log it!
Logged
I have no logs because I have a boost gauge (makes things easier)
lgtmelo
Full Member
Karma: +2/-13
Online
Posts: 125
Re: vehical maf limit
« Reply #6 on: March 22, 2024, 11:56:02 AM »
Quote from: IamwhoIam on March 22, 2024, 11:27:27 AM
You don't need to disassemble, just pay and use VehiCAL advanced and you'll be able to log it!
unfortunately vehical doesnt have the advanced mode already for my ecu, so id need to mail a full read, which i also dont have.
Logged
prj
Hero Member
Karma: +1072/-480
Offline
Posts: 6035
Re: vehical maf limit
« Reply #7 on: March 22, 2024, 01:51:34 PM »
It does now.
Logged
PM's will not be answered, so don't even try.
Log your car properly
-
WinOLS database
-
Tools/patches
lgtmelo
Full Member
Karma: +2/-13
Online
Posts: 125
Re: vehical maf limit
« Reply #8 on: March 22, 2024, 04:49:48 PM »
Quote from: prj on March 22, 2024, 01:51:34 PM
It does now.
yes sir! will look into it tomorrow. do you mind sharing the full read so that i can try to play with it in IDA?
Logged
lgtmelo
Full Member
Karma: +2/-13
Online
Posts: 125
Re: vehical maf limit
« Reply #9 on: March 25, 2024, 01:12:48 PM »
quick feedback, advanced mode is working beautifully, and im getting ~17 reads/sec without patching.
sadly, it seems the problem with max maf reading was not the actual variable limitation, as even logging straight from the var in vehical, i get a max of 1313.1kg/h for mshfm_w (=364.75g/s) and 160.148 for rl_w.
any tips here? maf scaling goes up to 2058 kg/h in MSHFMTP. is it the actual maf thats limited to 1313kg/h then?
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
November 22, 2024, 04:57:50 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...
