Pages: [1]
Author Topic: 8N0 906 018CS idle RPM  (Read 1259 times)
Micaaacek
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« on: April 17, 2024, 11:52:57 AM »

Hello,

please, can someone check my 8N0 906 018CS ECU flash ? ECU has been replaced, correctly coded into car but still holds very low RPM. Still around 700-740 RPM. Even with active A/C compressor.

I need to know what RPM are set up for idle. I have tried to increase RPM in adaptation via VCDS, but no change.

Its clearly downloaded flash file, no tunes, no updates. Simply stock.

Thank you.
« Last Edit: April 17, 2024, 01:17:08 PM by Micaaacek » Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #1 on: April 17, 2024, 01:19:41 PM »

Something like that? NLLM & NFSM changed.

Checksums okay.
Logged
Micaaacek
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« Reply #2 on: April 17, 2024, 01:31:51 PM »

Great, thank you very much. Will test soon.

Do you think the Audi lowered RPM on purpose ? Or is it fault ?
Logged
Micaaacek
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 9


« Reply #3 on: May 11, 2024, 07:34:24 AM »

I have tested the tuned file but the engine is going very rough at idle and RPMs have not changed. So I have returned to original version.

Anyway, would you have definition file for this ECU ? I need to improve BBgang because cruise control doesn't work at 4th gear.

Thank you.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)