Pages: [1]
Author Topic: Sniffing between OBD and Diag Tester  (Read 629 times)
mmb1000
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« on: April 22, 2024, 03:39:08 PM »

Hallo i tryed all to find out how to sniff the traffic between the OBD and the Diag Tester. Y - Cable i allready have.

I tryed ELM327 Terminal... AT Z, AT SP 4, AT HC1, AT MA - dont work.  AT MA dont show me anything. I Use a ELM327 clone. Maybe that is the Problem ?

Wireshark + ESP32 i dont get to work.

https://github.com/aster94/Keyword-Protocol-2000?tab=readme-ov-file

Every help will be estimated.

Thank you.
Logged
gt-innovation
Sr. Member
****

Karma: +60/-90
Offline Offline

Posts: 448


« Reply #1 on: April 23, 2024, 03:51:49 AM »

Look at Savvy Can. They even provide an esp32 firmware. Use an A0 or an A0 clone esp32 to flash it and log with savvy.
Logged
mmb1000
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #2 on: April 23, 2024, 04:10:31 PM »

i need to sniff ISO14230/ KWP2000... Savvycan is only for Can - yeah ?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)