Pages: [1]
Author Topic: M5.9.2 immo off 06A906018AD not working  (Read 567 times)
moffa13
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« on: April 24, 2024, 11:04:03 AM »


Hello,


My friend asked me to immo off but I could see that the eeprom was already desoldered once and it seems that it's already immo off (values set to 0x50) ?
However car starts and stalls directly

this is the link https://mega.nz/file/dAJ2lQRQ#pRR27s3VWjDqGxDlLHMM80OXhM70DSh0r0QUkalVhj4
Many thanks
Logged
stuydub
Full Member
***

Karma: +24/-12
Offline Offline

Posts: 230


« Reply #1 on: April 24, 2024, 11:28:41 AM »

its deffo off
Logged
moffa13
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #2 on: April 24, 2024, 11:33:20 AM »

What could cause the stall after 2 seconds ?

DTC 01128, 01176
Logged
moffa13
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #3 on: April 27, 2024, 11:53:09 AM »

Found the issue, these ecus contain 2 24c02 with same immo data structure.

One of them still had immo activated
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 17 queries. (Pretty URLs adds 0s, 0q)