NefMoto > Technical > Flashing and Chipping > Galletto 1260 Help
Pages: [1]
« previous next »
Author Topic: Galletto 1260 Help  (Read 1386 times)
C5AudiGirl
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 5
« on: May 28, 2024, 10:24:15 AM »
I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help?
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #1 on: May 29, 2024, 06:31:44 AM »
Quote from: C5AudiGirl on May 28, 2024, 10:24:15 AM
I am trying to fix my 06 audi a6 4.2 ecu 4F0910560. I am trying to flash it and now it does not have a HW version. Any help?
I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense.
Logged
Giving your mom a tuneup
C5AudiGirl
Newbie
*

Karma: +0/-3
Offline Offline

Posts: 5
« Reply #2 on: May 29, 2024, 02:15:38 PM »
Quote from: _nameless on May 29, 2024, 06:31:44 AM
I guess Ill bite. You are not providing enough info for anyone to help you. Also, what you wrote does not make any sense.

Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense.

I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #3 on: May 29, 2024, 05:56:37 PM »
Quote from: C5AudiGirl on May 29, 2024, 02:15:38 PM
Sorry, looking back on what I said does not make sense and I did not provide any real context. Let me try to make more sense.

I have an ME7.1.1 ecu and I was trying to flash a S4 firmware to it and I went into vagcom it no longer had a HW number, no dtc's at all. I flashed it back to the A6 bin i backed up and still the same issue. I assume you can not just flash firmwares like that they probally have to match the hardware inside the ecu. I am just trying to get it back to a working state as the way it came. If any more info is needed please let me know and I will provide.
It sounds like you are stuck in programming mode, or does vcds not connect to the ecu at all? What was the number on the ecu case and what software version did you write to it?
Logged
Giving your mom a tuneup
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 11:54:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.031 seconds with 16 queries. (Pretty URLs adds 0s, 0q)