NefMoto > ECU Files > ECU Definition Files > ECU Definition File Requests > xdf for an ancient 4Z7907551 (ME 7.1) (letterless box) 0261206638-1037-354809
Pages: [1]
« previous next »
Author Topic: xdf for an ancient 4Z7907551 (ME 7.1) (letterless box) 0261206638-1037-354809  (Read 1010 times)
the-nozzle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
..can someone  have mercy on my sinful soul and help me out ? The stock 4Z7907551R (and corresponding xdf) is unfortunately for ME7.1.1 and so I am not sure of any of the defined offsets.. Specifically I am looking for ESKONF location and what I am currently seeing .. is not making sense or compares to other bins/xdfs .. thanks in advance .
« Last Edit: June 19, 2024, 09:00:37 PM by the-nozzle » Logged
the-nozzle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
ori bin attached ..
Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
You can use ANY xdf for ECUs listed below.
All of them have the same adresses/sizes of map definitions.
See here for example. http://nefariousmotorsports.com/forum/index.php?topic=19287.msg144597#msg144597
ESKONF starts at addr $10C81 size 1x13
« Last Edit: June 20, 2024, 04:17:52 PM by gremlin » Logged
the-nozzle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
awesome - thanks for your help - follow up question : so I am using the stock bin, and loaded up the HS map pack xdf (or the earlier mentioned r box) - And indeed the location you mentioned makes sense (at least for the ignition coils so far) , however it seems that KFKHFM table starts earlier - 10C7E .. is this just a variation for that particular ECU ?
« Last Edit: June 21, 2024, 12:12:07 AM by the-nozzle » Logged
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 654
Quote from: the-nozzle on June 21, 2024, 12:08:23 AM
so I am using the stock bin, and loaded up the HS map pack xdf (or the earlier mentioned r box)

What do you think should happen if you use XDF which is designed for software that is incompatible with your hardware/software?R-box is multiconfigured (HS/AT) software ME7.1.1 and your "letterless" 551 is ME7.1 in hard dedicated HS version.  Just use the compatible to your software XDF for 8D0907551G (see again link in above message) instead of asking stupid questions.
Logged
the-nozzle
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
I misread one of the ecu numbers .. apologies . It's a lot of cross refs to get through - stupid questions will happen . Thanks for your help.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 25, 2024, 03:01:57 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)