Dev Blog
Forum
Wiki
About
NefMoto
>
Technical
>
Tuning
>
Tuning with no VVt camshaft and ECU with VVT
Pages: [
1
]
« previous
next »
Author
Topic: Tuning with no VVt camshaft and ECU with VVT (Read 423 times)
sinik44
Newbie
Karma: +0/-0
Offline
Posts: 2
Tuning with no VVt camshaft and ECU with VVT
« on: July 13, 2024, 05:47:37 AM »
Hello everybody.
In first, I'm French, so excuse me if my English is bad.
I have been registered on this forum for years and so far, I have always found the answers to my questions. But today I need help.
I have an AUDI A3 1.8T AGU that I upgraded to wideband with all the necessary parts except the intake camshaft and the VVT.
My ECU comes from an AUDI TT BAM 225ch 8N0906018H with the engine harness.
My question: Are the stock ignition maps a good basis when I have non-VVT camshafts or should I rely on the ignition maps of a non-VVT ECU to avoid problems engine like exhaust gas overheating?
Logged
JeanAwt
Full Member
Karma: +10/-12
Offline
Posts: 228
Re: Tuning with no VVt camshaft and ECU with VVT
« Reply #1 on: July 13, 2024, 10:14:14 PM »
you are talking about this: 058 109 021 M: AUM, ARX, ARY, AUQ, AMK, BAM, AUL 058 109 021 B: AGU 058 109 021 F: AGN, APG I don't think they are different in opening confirmed. and for the vvt you can activate/delete it in the file
Logged
A4 B5 avant 1.8T 2000 NO QUATTRO
sinik44
Newbie
Karma: +0/-0
Offline
Posts: 2
Re: Tuning with no VVt camshaft and ECU with VVT
« Reply #2 on: July 14, 2024, 03:10:12 AM »
Thank you for your response.
I have no problem disabling the VVT by deactivating the hardware in ESKONF, modifying the maps:
KFNWKHE
KFNWKHLLE
KFNWSE
KFNWWLE
And disabling the diagnostic with the code word CDNWS.
There is a slight difference between the camshafts 058 109 021 B and 058 109 021 M.
058 109 021 B 058 109 021 M
IVO = 18° IVO = 18°
EVC = 28° EVC = 28°
IVC = 28° IVC = 30°
EVO = 8° EVO = 10°
I have studied the maps of the FR sections:
ZWGRU 23.110
ZWSTT 4.30
ZWOB 4.10
ZWWL 5.40
MDZW 1.120
ZWMIN 5.10
From both VVT and non-VVT ECUs.
Since the VVT and non-VVT camshafts are slightly different and some ignition maps are very different between the VVT and non-VVT ECUs, I am wondering if I should start with the non-VVT ignition maps.
Thank you for reading.
Logged
Pages: [
1
]
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> Introductions
=> General Discussion
-----------------------------
Noob Zone
-----------------------------
=> Noob Questions
=> Noob Guides and FAQs
-----------------------------
Technical
-----------------------------
=> NefMoto Software
=> Tuning
===> Documents & Helpers & How To's
===> Community Projects
=> Diagnostics
=> Flashing and Chipping
=> Cluster and Immobilizer
===> ECU EEPROM images
===> Original Cluster dumps
===> Original Cluster dump requests
=> Data Logging
=> Reverse Engineering
=> Communication Protocols
-----------------------------
ECU Files
-----------------------------
=> ECU Definition Files
===> ECU Definition File Requests
=> Original ECU Files
===> Original ECU File Requests
=> Checksum Update Requests
-----------------------------
Vehicles
-----------------------------
=> Vehicle Tech
=> Project Cars
-----------------------------
Regional
-----------------------------
=> Canadian Regional Discussion
=> US Regional Discussion
-----------------------------
Classifieds
-----------------------------
=> For Sale
=> Wanted
=> Services
-----------------------------
Miscellaneous
-----------------------------
=> Off Topic
=> Forum Tech Support
=> Bizarro Messages Posted by Bots and Spammers
Navigation
Home
Help
Login
Register
Personal Tools
September 07, 2024, 06:22:01 PM
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Search
Advanced Search
Loading...