Pages: [1]
Author Topic: 6K0906032 0002 dct table  (Read 2639 times)
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 47


« on: July 24, 2024, 09:44:56 AM »

Hello All,
I'm looking for a CLAHSH, CLAHSHE, CLATES, CLATEVE, CLASLS, CLASLVE and CLASLPE adress.

I have similar 512kb files, but any mappack as I have dosen't have similar DCT table.

Thanks for help
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #1 on: July 24, 2024, 09:58:42 AM »

If you configure prokon / eskonf properly you won't need cla. Also, if you need cla maps you will not have long term fuel trims.
Logged

Giving your mom a tuneup
gremlin
Hero Member
*****

Karma: +196/-9
Offline Offline

Posts: 652


« Reply #2 on: July 24, 2024, 10:49:42 AM »

If you configure prokon / eskonf properly you won't need cla.

Here is PROKON/DEKON definitions for 6K0906032_0002 firmware.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #3 on: July 24, 2024, 10:52:13 AM »

Here I made a map pack with eskonf and prokon may
Logged

Giving your mom a tuneup
rysiektr
Jr. Member
**

Karma: +3/-3
Offline Offline

Posts: 47


« Reply #4 on: August 01, 2024, 07:54:33 AM »

Hi, thanks for it, but I found PROKON and eskonf before post my question, I have problem with DCT table only.

Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2800



« Reply #5 on: August 01, 2024, 10:02:06 AM »

Hi, thanks for it, but I found PROKON and eskonf before post my question, I have problem with DCT table only.



For the second time: You will never trigger any faults with the hardware deleted properly using prokon and eskonf. If you need to use codewords to delete errors, you are doing it wrong.
Logged

Giving your mom a tuneup
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)