Pages: [1]
Author Topic: canbus id 0x588 read boost problem  (Read 597 times)
tao13
Sr. Member
****

Karma: +17/-47
Offline Offline

Posts: 466


« on: August 30, 2024, 08:06:25 AM »

I have an ecu 8N0906018H with 5120 hack with 4bar map sensor.
I read canbus id 0x588 byte 5 like byte5*0.01 - 1 but value is vron
1. 0.12 bar
2. 1.55 bar
3. 0.12 bar
4. 1.55 bar
5. 0.12 bar
6. 1.55 bar
..
xx. 0.12 bar
xx. 1.55 bar
Can be this wrong values from 5120 hack or redefined map offsets?
On a stock file with a normal map, in the past it read correct value!

Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)