Pages: [1]
Author Topic: tool ME7 StageX remap calculator  (Read 618 times)
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 237


« on: September 11, 2024, 02:24:17 AM »

hi, I can't get this tool to work in Excel 2019. he doesn't do all the calculations .I tried a lot of macros enable things, but VBA code problem??... it must work on an earlier version of Excel 2016? If so, would it be possible? to update it? Or am I too stupid to use it? thanks

https://github.com/Lechugamax/ME7Stage1helper.git



I also tried wizard but also problems on excel 2019
« Last Edit: September 11, 2024, 02:36:34 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 237


« Reply #1 on: September 11, 2024, 02:25:44 AM »

sorry that one

update: after 4 hours I still can't get them to work correctly. Either the calculations don't work or are bad. Some buttons like the kfmiop axes recalculation don't work. Clearly don't work on Excel 2019.I will try on another PC
« Last Edit: September 11, 2024, 08:13:31 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 237


« Reply #2 on: September 11, 2024, 12:31:14 PM »

upadate:

I resolved the problem "compilation error in module 1" but I am not a computer scientist and I do not know why the calculation of the kfmiop axes does not happen. Yes or no button does nothing.  if anyone can help me.thanks
« Last Edit: September 13, 2024, 09:56:55 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
JeanAwt
Full Member
***

Karma: +10/-12
Offline Offline

Posts: 237


« Reply #3 on: September 13, 2024, 09:58:39 AM »

update: this works perfectly I just noticed that to recalculate the iop axes you just need to do the opposite 3 fill the stock iop axes first check 'YES' and do 2 irl after that recalculation.
« Last Edit: September 14, 2024, 01:04:09 AM by JeanAwt » Logged

A4 B5 avant 1.8T 2000 NO QUATTRO
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)