Pages: [1]
Author Topic: Location of TVTSPEV in Mbox  (Read 2705 times)
berTTos
Full Member
***

Karma: +24/-0
Offline Offline

Posts: 91


« on: July 25, 2012, 11:18:01 AM »

TVTSPEV - injection time offset based on estimated injector temperature

Gbox and RS4 are configured but Mbox is all 0
i have found that injected fuel mass does seem to change with temperature and i believe we do need this correction if we care about fine tuning to avoid LTFTs creeping to compensate.

4x1
Axis - 0x1C2C2 16bit
Data - 0x1C2CA 16bit
« Last Edit: July 25, 2012, 03:05:59 PM by berTTos » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)