Pages: [1]
Author Topic: How to set the KSTT map for LPG  (Read 88 times)
Kacpern
Jr. Member
**

Karma: +0/-5
Offline Offline

Posts: 32


« on: Today at 05:43:10 AM »

Hello everyone, I'm looking for guides and advice on how to decorate the KSTT map.
Problem
At a temperature of 0 to 20 degrees, the starter turns for 2-3 seconds before it starts, then it starts and runs well (holds idle speed), has the power to drive.
The starting dose is significantly reduced compared to gasoline.
0-5 degrees 6.5ms
10-15 degrees 5ms
20 degrees 4 ms 

These are the best results. I tried changing them up and down by 0.1 ms many times, but it didn't help.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)