Pages: [1]
Author Topic: MG1 disassembly (Ghidra or IdaPro)  (Read 655 times)
windel
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« on: October 23, 2024, 04:10:29 PM »

Hi,

Have MG1CS003 ECU (BMW B48/58 gen1), need to disassembly it.
Are there plugins for Ghidra for this ECU?
Or need to use IdaPro?

And which processor should I use? I have only up to TC29xx. But looks like I need a TC3xxx

Thanks!
Logged
prj
Hero Member
*****

Karma: +1069/-476
Offline Offline

Posts: 6011


« Reply #1 on: October 23, 2024, 04:45:56 PM »

MG1CS003 is PowerPC.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
windel
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 6


« Reply #2 on: October 23, 2024, 04:59:14 PM »

Which PowerPC type should I choose?
I see that it's SPC5777, but I don't see such type not in IDA or Ghidra...
Logged
prj
Hero Member
*****

Karma: +1069/-476
Offline Offline

Posts: 6011


« Reply #3 on: October 23, 2024, 06:04:35 PM »

Any big endian PowerPC with VLE instruction set.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Artemisia
Full Member
***

Karma: +13/-0
Offline Offline

Posts: 59



« Reply #4 on: October 23, 2024, 06:30:03 PM »

Which PowerPC type should I choose?
I see that it's SPC5777, but I don't see such type not in IDA or Ghidra...

PowerPC big-endian 32bit (In Ghidra: PowerPC:BE:32)

Links for reference:

https://www.nxp.com/docs/en/data-sheet/MPC5777M.pdf
http://www.elektronikjk.com/elementy_czynne/IC/E200Z0.pdf
https://github.com/NationalSecurityAgency/ghidra/labels/Feature%3A%20Processor%2FPowerPC

Edit: Just saw prj answered (You can delete my post)
« Last Edit: October 23, 2024, 06:32:12 PM by Artemisia » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)