Pages: [1]
Author Topic: M592 Immo OFF Help  (Read 3409 times)
eliotroyano
Hero Member
*****

Karma: +48/-10
Offline Offline

Posts: 831


« on: November 19, 2024, 01:15:54 PM »

Friends anyone can help me to do a proper/tested immo disable in this 8D0907557P D04 M592 ECU? Original 24C02 content is attached. I have found many different comments about M5.9.2 Immo. Also common Immo notification is not help me either. Maybe I am at the wrong adaptation value. Then some help is appreciated.
Logged
_nameless
Hero Member
*****

Karma: +347/-848
Offline Offline

Posts: 2861



« Reply #1 on: November 19, 2024, 01:35:33 PM »

Friends anyone can help me to do a proper/tested immo disable in this 8D0907557P D04 M592 ECU? Original 24C02 content is attached. I have found many different comments about M5.9.2 Immo. Also common Immo notification is not help me either. Maybe I am at the wrong adaptation value. Then some help is appreciated.

That ecu does not have a immo. No B chassis usa market m5.9.2 does. A chassis on the other hand... 98 beetle no immo and all the rest have immo.
Logged

If you are broke or expecting free handouts DO NOT message me. I'll probably put you on blast if you do.
eliotroyano
Hero Member
*****

Karma: +48/-10
Offline Offline

Posts: 831


« Reply #2 on: November 19, 2024, 01:51:58 PM »

That ecu does not have a immo. No B chassis usa market m5.9.2 does. A chassis on the other hand... 98 beetle no immo and all the rest have immo.

Then it is plug n´play, just install and turn engine on? no adapt procedure at all?
Logged
eliotroyano
Hero Member
*****

Karma: +48/-10
Offline Offline

Posts: 831


« Reply #3 on: November 26, 2024, 01:27:02 PM »

To answer my own question, yes install it without do anything (just that comes from factory) and works quite good.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.026 seconds with 16 queries. (Pretty URLs adds 0s, 0q)