Pages: [1]
Author Topic: M592 Immo OFF Help  (Read 1857 times)
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« on: November 19, 2024, 01:15:54 PM »

Friends anyone can help me to do a proper/tested immo disable in this 8D0907557P D04 M592 ECU? Original 24C02 content is attached. I have found many different comments about M5.9.2 Immo. Also common Immo notification is not help me either. Maybe I am at the wrong adaptation value. Then some help is appreciated.
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2809



« Reply #1 on: November 19, 2024, 01:35:33 PM »

Friends anyone can help me to do a proper/tested immo disable in this 8D0907557P D04 M592 ECU? Original 24C02 content is attached. I have found many different comments about M5.9.2 Immo. Also common Immo notification is not help me either. Maybe I am at the wrong adaptation value. Then some help is appreciated.

That ecu does not have a immo. No B chassis usa market m5.9.2 does. A chassis on the other hand... 98 beetle no immo and all the rest have immo.
Logged

Giving your mom a tuneup
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #2 on: November 19, 2024, 01:51:58 PM »

That ecu does not have a immo. No B chassis usa market m5.9.2 does. A chassis on the other hand... 98 beetle no immo and all the rest have immo.

Then it is plug n´play, just install and turn engine on? no adapt procedure at all?
Logged
eliotroyano
Hero Member
*****

Karma: +48/-9
Offline Offline

Posts: 826


« Reply #3 on: November 26, 2024, 01:27:02 PM »

To answer my own question, yes install it without do anything (just that comes from factory) and works quite good.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)