Pages: [1]
Author Topic: 8D0907551D 0261206382 350243 KFPBRK & KFPBRKNW  (Read 240 times)
M.Mischler
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64


« on: December 10, 2024, 11:05:18 AM »

I would like to know where I can find
  • - KFPBRK (Correction factor for combustion chamber pressure)
  • - KFPBRKNW (Correction factor for combustion chamber pressure at NWS active)
in 8D0907551D 0261206382 350243.

I have found the following possible locations by comparing with the K-Box and M-Box, but the values for the axes are too high. Can anyone confirm whether the following data is correct or which data is incorrect?










Logged
gremlin
Hero Member
*****

Karma: +201/-9
Offline Offline

Posts: 679


« Reply #1 on: December 10, 2024, 12:14:34 PM »

Can anyone confirm whether the following data is correct or which data is incorrect?

All data is correct.
This type of calibration with unrealistic axes can be encountered quite often if the factory calibration is essentially a constant regardless of the axis values or calibration is not really used in this firmware.
Logged
M.Mischler
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 64


« Reply #2 on: December 10, 2024, 02:32:26 PM »

All data is correct.

Thank you for your explanations and confirmation. I really appreciate your support.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.264 seconds with 18 queries. (Pretty URLs adds 0.001s, 0q)