Hello together,

Im currently reworking a file from a RS4 B5. ASJ Engine with 8D0907551K ECU.
I found that the ESKONF Config is a little bit weird:


ESKONF HEX:

Byte 0 -> 00 -> ZUE 4-1                                                    -> ok
Byte 1 -> FF -> ZUE 8-5?                                                   -> why? also in original File 7 ZUE Active, but why 7?
Byte 2 -> EF -> EV 4-1                                                       -> ok (like every other file but why does the ME7 only configure 4?
Byte 3 -> FF -> LSHHK      EFLA    SU/LDR    TEV                 -> why no error lamp, no N80?
Byte 4 -> 3F -> BKV           NC      AAV          MIL                 -> no mil and also nc to 11 / stock is 00
Byte 5 -> CC -> NC            NC        EKP        SLP                  -> nc to 11 / stock is 00 and also fuel pump relay to 11?
Byte 6 -> FF -> ULT          EAGR      SLV        NWS                -> ok

I would like to understand why someone configure it like this.  

Does somebody have the definitions of the missing NC or "?" Bits?
The full .ols . kp .csv files does not include ESKONF and also the FR is "only" for 1.8T and 2.0L.
The S4 Wiki template is all i need to work with, but on this File, there are so many changes i cant understand.
Maybe someone knows what happend here. And yes, im not using the file. I just want to "know" what someone thought about that.

Sorry for that ass format  
Thanks!

Yes seems like that. Fuck what a Fail.
My xdf just has 7 Bytes for ESKONF and is also wrong.

Just to clarify:
ESKONF should be from 0x10B70 till 0x10B7C?

Im not trying anything, but disable ZUE would be great lol. I just wanted to compare ESKONF. But everything in ESKONF was sketchy. The K-XDF is also same as Wiki ME7.5. The XDF is Wrong. I just overlooked it.

I will compare tomorrow and maybe then all questions are closed.
But still thanks for the hint!

The tool just works for 4 Cylinders and ME7.5

So after checking the XDf, now the ESKONF is 13 Bytes long, as is should, but i just look at the relevant bytes: 


Byte 0 -> 00 ->    EV6           EV3          EV4        EV1                     
Byte 1 -> FF ->     XX            NWS1       LULK      TEV                     -> NWS1 off? , LULK off? , TEV off?
Byte 2 -> EF ->     XX            EKP          AKF        XX                     
Byte 3 -> FF ->     XX            XX            XX         SLP                      -> J299 SAI pump relay fine and also deleted on the car
Byte 4 -> 3F ->    EV5           SLV           XX         NWS2                  -> SAI relai removed fine , NWS2 off why?
Byte 5 -> CC ->  HSH2          ULT           EV2        LDR                     -> HSH2 off ok, EV2 off?
Byte 6 -> FF ->     XX            BKV          HSH        XX                       -> HSH1 off ok.
Byte 7 -> FF ->     XX             XX            XX         XX
Byte 8 -> AA ->   ZUE            ZUE          ZUE       ZUE
Byte 9 -> FA ->    ZUE            ZUE         ZUE        ZUE


So the question is, why would someone turn off NWS 1/2 , Airboxflap , N80 Evap and the EV2?
That whole .bin is sketchy alot of the Knocking Maps are also touched like LDRXNZK , KRFKN and maxed out wtf?

And i know, im not using this bin. I jsut want to learn from others. But it looks like im not learning something good on this bin.