NefMoto > Technical > Tuning > M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation
Pages: [1]
« previous next »
Author Topic: M5.9.2 - 06A 906 018 GM - Second Lambda Deactivation  (Read 9067 times)
00gtw00
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« on: August 03, 2012, 07:51:00 AM »
I'm looking for damos or help with second lambda deactivation in M5.9.2 06A906018GM - VW Golf 2.0 AQY 115HP.

I can't find CWKONLS.
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #1 on: August 03, 2012, 10:39:03 AM »
 Grin
Logged
00gtw00
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #2 on: August 04, 2012, 07:12:26 AM »
In attachment org bin for 06A 906 018 GM - 0 261 206 921
Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350
« Reply #3 on: August 05, 2012, 05:05:28 AM »
Hi,

I wonder if you will find CWKONLS in a M5.9.2 file...  Me thinks that's ME7-territory.

Cheers,

PvL
Logged
00gtw00
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6
« Reply #4 on: August 05, 2012, 08:13:08 AM »
Right. Any one can give me a tip Smiley ?
Logged
240sxpooter
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 32
« Reply #5 on: August 06, 2012, 07:14:22 AM »
Quote from: 00gtw00 on August 03, 2012, 07:51:00 AM
I'm looking for damos or help with second lambda deactivation in M5.9.2 06A906018GM - VW Golf 2.0 AQY 115HP.

I can't find CWKONLS.

 I think you will be looking for these to deactivate the rear O2

CDLSH -Codewort Sondendiagnose hinter Kat im OBDII-Mode (invers: Europa-Mode) = Maybe @ 6F9B Currently 1, to deactivate change to 0
CDHSV - Codewort Heizerdiagnose vor Kat im (CDHSV = 0  => keine Diagnose) = Maybe @ 655B Currently 0
CDHSH - Codewort Heizerdiagnose hinter Kat (CDHSH = 0  => keine Diagnose)= maybe @665C Currently 0

 I am by no means 100% on the location of these bits but the CDLSH closely matched a file i had so test these with caution.

 




Logged
pvl
Sr. Member
****

Karma: +32/-1
Offline Offline

Posts: 350
« Reply #6 on: August 06, 2012, 07:15:58 PM »
Hi 240sxpooter,

I saw you had some interesting information. You where referring to "a file you had".  Would you be so kind to post that one ?

It's had to get hold of these important files...

And if possible, also the file which has the 3 stated o2 switches.

You may also P.M. me about it.

Thanks,

PvL
Logged
xxx8indxxx
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 115
« Reply #7 on: August 07, 2012, 01:31:10 AM »
   this should be 02 heating address
Logged
240sxpooter
Jr. Member
**

Karma: +5/-1
Offline Offline

Posts: 32
« Reply #8 on: August 07, 2012, 05:53:30 AM »
Also in your ORI file I have scene a tune with the area between 7469-77c7 Zero'ed to remove all DTC's.
Logged
xxx8indxxx
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 115
« Reply #9 on: August 07, 2012, 08:05:09 AM »
I might have to try that out 
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #10 on: November 18, 2012, 05:08:38 PM »
Quote from: xxx8indxxx on August 07, 2012, 01:31:10 AM
   this should be 02 heating address

i found this set of data in a file as well but readiness still shows as failed after flashing and checking on the bench. does the ecu need to be in the car (engine running)? or are there still pieces to the puzzle missing? i 00'd the data, is that correct?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 23, 2024, 03:36:28 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)