Hello guys,

I have car, with 2.0 tfsi 211hp automatic gearbox, med17.1, downpipe installed.
Target is st2 with heavy p&b when shifting if it can be done in this mode 
ECU label is 8k2907115d but if connect china pcm with 48 module this ecu identified like catalogue number 8k2907115al, and nothing about firmware number.
As i understand, this is high tunable ecu, and flash can get only by virtual reading with 58 module, but, here is the option like search random flash with ecu catalogue number and should to try write by pcm, is it correct?

I dont have ktag, so this is not my option.

Thanks in advance 

Regards,
Daniel