Pages: [1]
Author Topic: 01 audi s4 holset turbo  (Read 12076 times)
Surferkirsch
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« on: August 09, 2012, 11:26:08 PM »

So i bought this car with a worn out clutch about 6 months ago, 158xxx, decided to go ahead and upgrade to ko4s when i changed the clutch, along with a full gasket set. A week ago, the porcelin from a spark plug fell out of the plug and locked my right side turbo, destroying the wheels, and sending rediculous oil to my intake. I am good with engines and cars, but really? 2nd set of turbos, and ihave to go through hell to even check them? I decided as soon as the turbo went, i love this damn car too much to ever get rid of it, so i started my complete modification stage to make my life easier and my car even more fun. Im worried a bit about the tune,especially since i cant seem to get thefile to checksum anything, or figure out how to datalog, but once i start her up tommorrow im planning on spending allweekend datalogging. Smiley enjoy, i know im rediculously stoked about this.
Logged
marcellus
Sr. Member
****

Karma: +2/-1
Offline Offline

Posts: 472


« Reply #1 on: August 14, 2012, 11:24:14 PM »

What turbo are you using?
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #2 on: October 20, 2012, 01:02:26 AM »

All of these single turbo threads have me eyeballing the PDR super hx-40 I have sitting in my backroom..........
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
cactusgreens4
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 110


« Reply #3 on: October 22, 2012, 12:10:57 PM »

All of these single turbo threads have me eyeballing the PDR super hx-40 I have sitting in my backroom..........

DO IT!
Logged
ddillenger
Hero Member
*****

Karma: +641/-21
Offline Offline

Posts: 5640


« Reply #4 on: October 22, 2012, 01:09:03 PM »

I'm thinking that since it's not vgt it may be a bit laggy-any thoughts? Its got a ported 16cm exhaust housing on it...
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
cactusgreens4
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 110


« Reply #5 on: October 22, 2012, 05:36:08 PM »

I'm thinking that since it's not vgt it may be a bit laggy-any thoughts? Its got a ported 16cm exhaust housing on it...

dont quote me on this but I think the variable geometry turbos are hard to control with our ecu's... or maybe thats just the 20v turbo I am thinking of.
Logged
Surferkirsch
Jr. Member
**

Karma: +1/-0
Offline Offline

Posts: 30


« Reply #6 on: October 23, 2012, 11:35:16 AM »

not sure what it was, i took it all back apart again.. it was around an hx-40. it was too laggy for my liking. im currently building up the bottom end, and then im going to go with a smaller turbo, and make some header manifolds for it to give more air.
Logged
haggard69er
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« Reply #7 on: November 14, 2012, 02:13:43 PM »

the 16cm2 housing on a stock block is way to big imo. I am also exploring holset turbos and have decided on a hx35 (seven blade comp), it will flow around 60lbs which will be what i need to obtain  my hp goal. you could also look for a smaller exhaust housing for your hx40 to help spool, but a smaller holset housing will most likely need to be machined out to fit. good luck!
Logged
prj
Hero Member
*****

Karma: +1072/-480
Offline Offline

Posts: 6035


« Reply #8 on: November 15, 2012, 04:01:08 AM »

the 16cm2 housing on a stock block is way to big imo.

What?

I use these housings on the Audi 2.2T engine without any issue. The 16cm^2 is the smallest I use on those.
Considering this has 2.7 liters displacement, then no, I would say 16 is even a little on the small side for a HX40.
Logged

PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)