Pages: [1]
Author Topic: Auto to manual trans swap 06A906032HQ  (Read 1397 times)
ugubugu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« on: August 12, 2025, 02:32:06 PM »

Hello,
I need some information about the ECU software.
I’m swapping my Tiptronic 09A gearbox to a 6-speed manual.
My current ECU is 032HQ does anyone know which manual .bin file is ready to flash?
Logged
gremlin
Hero Member
*****

Karma: +217/-10
Offline Offline

Posts: 758


« Reply #1 on: August 12, 2025, 05:36:24 PM »

I’m swapping my Tiptronic 09A gearbox to a 6-speed manual.
My current ECU is 032HQ does anyone know which manual .bin file is ready to flash?
Crossflash to any of  032HN / 032MJ /032SJ firmware and than set coding 11x1x instead of 11x5x
Logged
ugubugu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #2 on: August 12, 2025, 11:41:19 PM »

Crossflash to any of  032HN / 032MJ /032SJ firmware and than set coding 11x1x instead of 11x5x

HS will be fine?
Logged
gremlin
Hero Member
*****

Karma: +217/-10
Offline Offline

Posts: 758


« Reply #3 on: August 13, 2025, 02:48:39 PM »

HS will be fine?

No.
This is a firmware for the US market.
The engine and car config has some hardware differences from the Euro4 version.
Also, this firmware does not support 6-speed manual transmission, only 5-speed.
Logged
ugubugu
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 9


« Reply #4 on: August 14, 2025, 01:07:30 PM »

No.
This is a firmware for the US market.
The engine and car config has some hardware differences from the Euro4 version.
Also, this firmware does not support 6-speed manual transmission, only 5-speed.


Ok thank you
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 14 queries. (Pretty URLs adds 0s, 0q)