Fero
Newbie
Karma: +0/-1
 Offline
Posts: 15
|
 |
« on: January 04, 2026, 06:16:34 AM »
|
|
|
Hello Good people of this very helpful Forum.
I’m starting a DIY project to tune my own car, an A4 B7 2.0TFSI Quattro Tiptronic BWT engine, with forged internal, big turbo, upgraded HPFP, LPFP, S4 fuel pressure, and S3 Injectors.
I have been at it for about a month and have settled on the current tune and the drivability is acceptable. I haven’t done any logs yet, as I’m still trying to fine tune before I go blasting, and I only have access to VCDs which I understand is limited.
So I’m just seeking your opinion on the current maps.. The current issue is that I feel a little jerk when car is shifting, and its weak when going uphill part throttle.
|
|
|
|
|
Logged
|
|
|
|
fknbrkn
Hero Member
Karma: +219/-24
Offline
Posts: 1551
mk4 1.8T AUM
|
|
« Reply #1 on: January 04, 2026, 07:26:38 AM »
|
|
|
I haven’t done any logs yet opinion on the current maps this turbocharger should be big af for those values |
|
|
|
|
Logged
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #2 on: January 04, 2026, 07:33:31 AM »
|
|
|
this turbocharger should be big af for those values
Its a Chines Custom K04 claiming 450HP, Surprisingly it does deliver these numbers.. for how long though I have no idea.. |
|
|
|
|
Logged
|
|
|
|
vanrhj
Full Member
Karma: +0/-5
Offline
Posts: 60
|
|
« Reply #3 on: January 05, 2026, 06:12:27 AM »
|
|
|
Remember: KFMIRL is inverse KFMIOP Wink
|
|
|
|
|
Logged
|
|
|
|
Dande
Full Member
Karma: +7/-1
Offline
Posts: 83
|
|
« Reply #4 on: January 06, 2026, 01:40:11 AM »
|
|
|
I hope it's just a joke.
|
|
|
|
|
Logged
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #5 on: January 06, 2026, 09:59:56 AM »
|
|
|
I hope it's just a joke.
That bad?? |
|
|
|
|
Logged
|
|
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #7 on: January 06, 2026, 11:56:58 AM »
|
|
|
Yes this is a good source I'm currently going through it to understand what im doing. |
|
|
|
|
Logged
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #8 on: January 06, 2026, 12:16:26 PM »
|
|
|
Remember: KFMIRL is inverse KFMIOP Wink
I'm having so much trouble understanding how this works! |
|
|
|
|
Logged
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #9 on: January 06, 2026, 01:10:19 PM »
|
|
|
Remember: KFMIRL is inverse KFMIOP Wink
How does this look? |
|
|
|
|
Logged
|
|
|
|
vanrhj
Full Member
Karma: +0/-5
Offline
Posts: 60
|
|
« Reply #10 on: January 06, 2026, 11:50:34 PM »
|
|
|
Below is a good example of the inverse for the two tables.
|
|
|
|
|
Logged
|
|
|
|
Mike Tries
Jr. Member
Karma: +1/-1
Offline
Posts: 34
|
|
« Reply #11 on: January 20, 2026, 09:47:48 AM »
|
|
|
You really need to post logs. I don't think that people will be able to give you precise guidance without seeing the results of what you're putting into your tables. Keep them short--don't log yourself driving around for 20 minutes. Third gear from 3,000 to redline if you can swing it.
Take lots of notes about what you change and why you changed it. You'll forget later. This is a lot to keep in your brain.
|
|
|
|
|
Logged
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #12 on: January 20, 2026, 10:01:57 AM »
|
|
|
I have done so much changes since. But my main problem is finding a reliable logging software. VCDs is not that reliable
|
|
|
|
|
Logged
|
|
|
|
Mike Tries
Jr. Member
Karma: +1/-1
Offline
Posts: 34
|
|
« Reply #13 on: January 20, 2026, 03:24:33 PM »
|
|
|
|
|
|
|
|
Logged
|
|
|
|
Fero
Newbie
Karma: +0/-1
Offline
Posts: 15
|
|
« Reply #14 on: January 20, 2026, 03:35:07 PM »
|
|
|
Works for Med9.1? What cable can I use? |
|
|
|
|
Logged
|
|
|
|
|
