Pages: [1]
Author Topic: If I connect my ecu to galletto 1260 would be work?  (Read 4977 times)
henkyke
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13


« on: August 15, 2012, 07:17:07 AM »

i have a golf 4 1.9 tdi
I think it has a edc15 ecu.
I would like to bench flesh .

If I connect the ecu with the galetto and the power supply like as I draw it on this picture would it be able to get in boot mode and remap the ecu?
Should i looking for the boot pin as well or it wont be necessary? if i should is the boot pin inside the ecu?
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #1 on: August 15, 2012, 07:25:00 AM »

http://nefariousmotorsports.com/forum/index.php?topic=2403

Why do we need two posts about this?
Logged
henkyke
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13


« Reply #2 on: August 15, 2012, 07:41:41 AM »

Could you give me at least a yes or no answer?
Logged
nyet
Administrator
Hero Member
*****

Karma: +608/-168
Online Online

Posts: 12270


WWW
« Reply #3 on: August 15, 2012, 08:52:15 AM »

I don't thing being rude and posting the same post several times is going to get you anywhere.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
henkyke
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13


« Reply #4 on: August 15, 2012, 08:58:46 AM »

OK then delete please my previous post and just leave this one online.
thx,
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)