Pages: [1] 2
Author Topic: Which sparkplugs do you use, why do you on what tune?  (Read 11020 times)
AndiS4
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 117



« on: August 16, 2012, 12:13:44 AM »

Hi!
What experiences have you made at sparkplugs with its heat ratings for your tuned S4 or RS4?

How far does the colder spark plug take effect on knocking? Where is the limit to carbon fouling?

Stock in europe NGK Platin are used at S4 with "6´" heat value RS4 with "7´" heat value.

Is it possible to get NGK PFR8Q anywhere? I didnt find them yet.

Regards
Logged
s-company
Full Member
***

Karma: +3/-0
Offline Offline

Posts: 104


« Reply #1 on: August 16, 2012, 02:47:52 PM »

hello,
i use pfr7q up to 750HP with no problems!
pfr8q do not exist!
Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367


« Reply #2 on: August 17, 2012, 12:49:01 AM »

I've been using PFR7Qs in my stage 3 S4 for a while and I did not really have any issues. Now I am running bosch sidefires.
I also converted to FSI coils and thrown my ICMs out, and theoretically these coils would allow running a larger gap, but I did
not test that yet.
Logged
RS4boost
Full Member
***

Karma: +46/-0
Offline Offline

Posts: 125


« Reply #3 on: August 17, 2012, 05:17:13 AM »

The best experience with high boosted S or RS4 engines I have made with a modified "NGK PFR7Q 7963 Platin" spark plug, with a changed electrode gap of 0,55mm.


« Last Edit: August 17, 2012, 05:19:19 AM by RS4boost » Logged

Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!


« Reply #4 on: August 17, 2012, 10:17:01 AM »

NGK BKR7E - they are copper plugs.  I change them every time I change my oil. 

I don't understand why anybody would ever use a platinum plug in a performance application unless changing the plugs required pulling the engine.



Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367


« Reply #5 on: August 17, 2012, 10:22:30 AM »

Well on the S4 it is not a 5 minute job, sometimes it takes me 1.5 hours to change plugs
and it's a pain (For me). BKR7E is what i've been using for a while as well, but I just don't
feel like gapping all the time, but that's all because i am _super_ lazy. Smiley

NGK BKR7E - they are copper plugs.  I change them every time I change my oil. 

I don't understand why anybody would ever use a platinum plug in a performance application unless changing the plugs required pulling the engine.




Logged
Jason
Hero Member
*****

Karma: +38/-0
Offline Offline

Posts: 500


Breaks everything!


« Reply #6 on: August 17, 2012, 10:29:29 AM »

Do you have bigger inlet pipes in the way or a cold air setup that's difficult to remove?  The only thing I have done to make it easier to do is use a socket head cap screw on the coils near the inlet pipes so I can use a ball driver to remove them.  I'd be surprised if it took me all of 10 minutes, including beer consumption Cheesy
Logged
rnagy86
Sr. Member
****

Karma: +6/-11
Offline Offline

Posts: 367


« Reply #7 on: August 17, 2012, 10:48:21 AM »

Do you have bigger inlet pipes in the way or a cold air setup that's difficult to remove?  The only thing I have done to make it easier to do is use a socket head cap screw on the coils near the inlet pipes so I can use a ball driver to remove them.  I'd be surprised if it took me all of 10 minutes, including beer consumption Cheesy

Well I have to remove the airbox, move all the parked heating hoses and the coolant reservoir out of the way and be really careful to avoid breaking a T piece which I did once and had coolant spraying all over. After that it should be fine Smiley Actually now it would be more easier because I've converted to FSI coils so I don't even have to unbolt the coils anymore just pop 'em out. Maybe my problem is that I was always doing it in my friend's garage and we probably spent a lot of time chit-chatting and smoking Smiley ... or maybe I should not compare changing the plugs on my brother's Opel Corsa 1.2, which is exactly 3 minutes Smiley
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #8 on: August 17, 2012, 10:51:54 AM »

NGK PFR7B, NGK PFR7Q, NGK BKR7EIX for medium power.

NGK BKR8EIX for more than 230hp/liter.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
AndiS4
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 117



« Reply #9 on: August 27, 2012, 02:13:01 AM »

Thumbs up!
Great Info!

Thanks a lot.
Logged
jochen_145
Full Member
***

Karma: +9/-4
Offline Offline

Posts: 177


« Reply #10 on: February 23, 2019, 05:49:49 AM »

reactivating this question:

any proposals for spark plugs for a low tuned 1.8T 5V (180PS) Audi APP engine ?

What do you recoment for a replacement spakeplug ?

Logged
316LV
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 150


« Reply #11 on: February 23, 2019, 09:32:36 AM »

NGK BKR6E or NGK BKR7E. i use the 6E at lower boost levels and the 7E at higher boost on a 1.8t AWP engine. Gap either to .028 - .030 and you will be good to go. I get them for ~$2.50/ea so I change them at each oil change.
Logged

Go ahead and give me negative karma... I don't care if you like what I post princess.
marto7
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 67



« Reply #12 on: October 05, 2019, 03:24:11 AM »

Sorry for bumping this old thread but want to hear best options for PFR7Q sparks.Do you guy reduce the gap on these ? I ordered it for 1.8T with arround 300-350hp on 1.5boost. Thanks

Edit: Also i need to know what do you guys think about try with different sparkplugs.For example 1 and 4 cyl with BKR7E and 2 and 3 with BKR8E, then read logs ?
« Last Edit: October 05, 2019, 04:21:27 AM by marto7 » Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5789


« Reply #13 on: October 08, 2019, 01:47:40 AM »

Sorry for bumping this old thread but want to hear best options for PFR7Q sparks.Do you guy reduce the gap on these ? I ordered it for 1.8T with arround 300-350hp on 1.5boost. Thanks
If you have misfires then you need to reduce plug gap, simple. For more than 200hp per liter I use 0.6mm.

Quote
Edit: Also i need to know what do you guys think about try with different sparkplugs.For example 1 and 4 cyl with BKR7E and 2 and 3 with BKR8E, then read logs ?
Really stupid idea, and also you don't need 8 plugs.
With 8 plugs you are going to start having issues with soot accumulation and not burning it off the tips if you use gasoline. 7 is as far as you can go on gasoline in a street car, especially in colder weather too.
On E85 the 8 is a very good idea because ethanol does not soot up the plugs as much and is very prone to pre-ignition.

Logged

PM's will not be answered, so don't even try.
Log your car properly.
marto7
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 67



« Reply #14 on: October 08, 2019, 08:15:56 AM »

I dont have misfires, but i have timing pull.Will i have better results with closer gap ? And also your opinion on copper vs iridium/platinum ?
My car is A4 1.8T with 300+ hp on gasoline. 1,5 bar boost
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 18 queries. (Pretty URLs adds 0s, 0q)