Pages: [1]
Author Topic: DQ250 how to disable 6th gear  (Read 2464 times)
curamrdan
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 131


« on: July 16, 2026, 04:35:08 PM »

Hi, im asking this non-sense question, maybe,  but im working on hillclimb race car which is rules limited by performancefactor score and some points can be saved by reducing amount of gear, as car will never run 6th during race anyway.
Car drives in manual mode only.
Do anybody has tips, which parameters inside TCU file manipulate, please?
Logged
Ron28
Newbie
*

Karma: +1/-2
Offline Offline

Posts: 10


« Reply #1 on: August 09, 2026, 06:16:56 AM »

Do you have found a solution? If not, upload your file.
Logged
Dave9n3
Sr. Member
****

Karma: +27/-10
Offline Offline

Posts: 301


« Reply #2 on: August 09, 2026, 02:37:21 PM »

maybe increase auto upshift RPM for 5th gear to 9999 or FF when in manual mode. that way car will never jump to 6th.
Logged
curamrdan
Full Member
***

Karma: +4/-4
Offline Offline

Posts: 131


« Reply #3 on: August 30, 2026, 02:53:21 PM »

Did not try it yet. Automatic upshift in manual mode is already "blocked" , i need to block it when driver use paddles. I think somethings like there is parameter of maximum rpm to downshift according gear, if there is a table for minimum rpm for upshift, but not searched for it yet.  My file is not much important, as most files i saw are similar fashion, its DQ250F.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 17 queries. (Pretty URLs adds 0s, 0q)