NefMoto > Technical > Tuning > 1,9TDI ALH-help me please
Pages: [1]
« previous next »
Author Topic: 1,9TDI ALH-help me please  (Read 7260 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« on: August 21, 2012, 01:55:14 PM »
I tune my Leon 1,9tdi ALH 66kw...I have nozzles powerplus764(0.226) and intake into turbo from ARL(airbox,maf housing,aluminium pipe)..Car is smoke and much eat  Smiley

I rewrite smoke limiter with axis from ARL into my file-car is running better,but it still smoke, boost is 1,25bar..

What I have yet to try?
Logged
chiptuners
Newbie
*

Karma: +4/-1
Offline Offline

Posts: 17
« Reply #1 on: August 22, 2012, 06:38:20 AM »
change pump voltage map to less volts, you can also change dw axis and begin of injection, log it also,
Logged
tdifan86
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #2 on: August 22, 2012, 07:17:53 AM »
Hi!

You have to recalibrate the MAF-linearization or switch to MAP-based smoke limiter.

When switching to MAP-based smoke limiter you also have to enable EGR because of incorrect MAF-reading (should not be a great problem).

The next thing is to recalibrate the pump voltage map + SOI maps and also to extend the IQ axis - otherwise you will never get it running properly.

Regards
« Last Edit: August 22, 2012, 07:20:21 AM by tdifan86 » Logged
chiptuners
Newbie
*

Karma: +4/-1
Offline Offline

Posts: 17
« Reply #3 on: August 22, 2012, 09:23:18 AM »
forgot you had maf change Smiley yes need maf linearisation or  you can also switch to map based rather than maf sensor
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« Reply #4 on: August 22, 2012, 09:43:48 AM »
Quote from: tdifan86 on August 22, 2012, 07:17:53 AM
Hi!

You have to recalibrate the MAF-linearization or switch to MAP-based smoke limiter.

When switching to MAP-based smoke limiter you also have to enable EGR because of incorrect MAF-reading (should not be a great problem).

The next thing is to recalibrate the pump voltage map + SOI maps and also to extend the IQ axis - otherwise you will never get it running properly.

Regards

how I swith to map-based smoke limiter?

SOI and MAF linearization what address have?
Logged
tdifan86
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2
« Reply #5 on: August 22, 2012, 11:29:22 PM »
Quote
how I swith to map-based smoke limiter?

You have to change some values in the hexdump and to "adapt" at least the "MAP vs IQ" - smoke map. You can use old 1,9TDI VP37 damos - everything is in there Wink.
If you want to do it oem-like, you also have to adapt a second map - "IAT vs MAP" - correction map. The more IAT, the less airmass is sucked at same manifold pressure => at higher IAT your car will smoke.

Quote
SOI and MAF linearization what address have?

Post your ori-file

Regards
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« Reply #6 on: August 23, 2012, 12:48:18 AM »
I'll try to find something on the switch Map-based smoke limiter,I hope that I find something about it,because I´ve done it before.
When I use the VP37 damos,so all maps are crazy  Sad

I attached the ori file
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« Reply #7 on: August 27, 2012, 03:24:08 PM »
please,SOI and MAF linearization what address have?
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 09:03:26 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 16 queries. (Pretty URLs adds 0s, 0q)