Pages: [1]
Author Topic: Which file for A6 2.7t? A-Box?  (Read 4123 times)
passuff
Jr. Member
**

Karma: +3/-9
Offline Offline

Posts: 48


« on: August 26, 2012, 09:23:10 AM »

I have a 99' A6 2.7t with Tiptronic and Bosch MAF. I would like to replace my original file with a more common one, but I'm not sure which one to use.
Is it only possible to flash Bosch MAF files or is it possible toto recode a Hitachi file to Bosch MAF?

What would you recommend me to do?
Logged
passuff
Jr. Member
**

Karma: +3/-9
Offline Offline

Posts: 48


« Reply #1 on: August 27, 2012, 10:42:45 AM »

I just found the info  at S4Wiki, that it is not possible to code engine with:
Bosch Maf
ESP
Tiptronic
I guess there was no S4 with this combination or is there any?
It doesn't matter for me if the file is 29f400 (512kb) or 29f800 (1024kb) as I have a socket on my ECU and can use both cip types...
Logged
phila_dot
Hero Member
*****

Karma: +173/-11
Offline Offline

Posts: 1709


« Reply #2 on: August 27, 2012, 11:53:41 AM »

Is the pinout the same bt 512 and 1024?

If so, L box modifed for bosch maf.
Logged
passuff
Jr. Member
**

Karma: +3/-9
Offline Offline

Posts: 48


« Reply #3 on: August 27, 2012, 12:39:11 PM »

Yes ECU is completely the same. Only difference is flash chip...
I will try to start a L-Box tune... Thanks alot!
Logged
gsxeclipsepsi
Full Member
***

Karma: +0/-43
Offline Offline

Posts: 70


« Reply #4 on: September 11, 2012, 11:17:41 PM »

I have a nice stage 1 tune that I like a lot good mpg with new dv. It's not mine but someone else's but yes it's Bosch. Also have a s4 stock 265hp LBox Bosch too. All for tip and I have tested them can upload if you want in the morning. It's about a 40hp or more increase you get to feel the boost now. It's a 91 octane file.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)