Check readiness bit

Pages: [1]

« previous next »

Author

Topic: Check readiness bit (Read 7324 times)

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Check readiness bit « on: September 09, 2012, 10:49:26 PM »

Is there a way to check the readiness bit without VAG-COM? After i started flashing my own files vag-com wont connect to the engine controller anymore, it briefly connects sometimes and then errors out before I can get a chance to check readiness.

Is there a say to check it in any other way?


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Check readiness bit « Reply #1 on: September 10, 2012, 08:25:02 AM »

Of course. Read the ram variable.

Log "ready" with ME7L. I think I have outlined the bit layout in the readiness thread.


	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Check readiness bit « Reply #2 on: September 10, 2012, 10:36:36 AM »

Quote from: phila_dot on September 10, 2012, 08:25:02 AM

Of course. Read the ram variable.

Log "ready" with ME7L. I think I have outlined the bit layout in the readiness thread.

Thats what im talking about, added it to my list

bit = 0dec = all passed right?


	Logged

phila_dot

Hero Member

Karma: +173/-11
Offline

Offline

Posts: 1709

	Re: Check readiness bit « Reply #3 on: September 10, 2012, 02:37:36 PM »

Quote from: Bische on September 10, 2012, 10:36:36 AM

Thats what im talking about, added it to my list

bit = 0dec = all passed right?

A cleared bit means that the test was passed and cycle flags are set, a set bit means a failed test or cycle flags haven't been set.


	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Check readiness bit « Reply #4 on: September 10, 2012, 10:43:51 PM »

Quote from: phila_dot on September 10, 2012, 02:37:36 PM

A cleared bit means that the test was passed and cycle flags are set, a set bit means a failed test or cycle flags haven't been set.

Alright, mine shows up as zero even right after I flash a new file. Does the readiness not reset when you flash a new file in there?


	Logged

matchew

Hero Member

Karma: +47/-22
Offline

Offline

Posts: 503

	Re: Check readiness bit « Reply #5 on: September 11, 2012, 01:25:43 AM »

Clear the fault codes and then recheck.


	Logged

Bische

Sr. Member

Karma: +25/-4
Offline

Offline

Posts: 397

	Re: Check readiness bit « Reply #6 on: September 11, 2012, 11:01:58 AM »

Quote from: matchew on September 11, 2012, 01:25:43 AM

Clear the fault codes and then recheck.

This did the trick, my readiness did reset when I cleared the codes. Pretty nice thing it doesnt reset automatic like the adaptions when you flash a new file.

Here is a pic from ross-tech.com showing the bit description:

Thanks phila_dot & matchew!


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

February 16, 2025, 11:19:22 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search