|
prj
|
 |
« Reply #15 on: May 28, 2015, 10:50:01 PM »
|
|
|
If you remove EGT on a K04 car and only disable the EGT codewords you will end up 100% with molten engine because the car will never go richer than 0.9 lambda.
|
|
|
|
|
Logged
|
|
|
|
|
sonique
|
|
« Reply #16 on: May 29, 2015, 04:15:34 AM »
|
|
|
 If you remove EGT on a K04 car and only disable the EGT codewords you will end up 100% with molten engine because the car will never go richer than 0.9 lambda.
ok and CWLAMBTS set 4 correct same as 180ps car ? and modification KFFDLBTS KFLBTS KFDLBTS need anyother map?
|
|
|
|
|
Logged
|
|
|
|
KmosK04
Full Member
Karma: +5/-10
 Offline
Posts: 97
|
|
« Reply #17 on: May 29, 2015, 05:29:43 AM »
|
|
|
Yes needs more work. Read ATR, ATM, LAMBTS and LAMFAW modules. You can also compare the files from non egt versions and see the differences.
|
|
|
|
|
Logged
|
|
|
|
|
sonique
|
|
« Reply #18 on: May 29, 2015, 05:38:50 AM »
|
|
|
Yes needs more work. Read ATR, ATM, LAMBTS and LAMFAW modules. You can also compare the files from non egt versions and see the differences.
ATR only need CATR set 0 no other thing LAMBTS i think fine ok, i check other 2 module thanks |
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #19 on: June 02, 2015, 06:22:24 AM »
|
|
|
LAMBTS is disabled via a different mechanism on K04 factory tunes.
Make sure you test and fix this ...
|
|
|
|
|
Logged
|
|
|
|
|
sonique
|
|
« Reply #20 on: June 02, 2015, 07:28:24 AM »
|
|
|
LAMBTS is disabled via a different mechanism on K04 factory tunes.
Make sure you test and fix this ...
and need any other module checking ? ATR, ATM, LAMBTS and LAMFAW |
|
|
|
|
Logged
|
|
|
|
|
tjwasiak
|
|
« Reply #21 on: June 02, 2015, 09:55:02 AM »
|
|
|
LAMBTS is disabled via a different mechanism on K04 factory tunes.
Make sure you test and fix this ...
Could you give us some hints where should we look? |
|
|
|
|
Logged
|
|
|
|
|
sonique
|
|
« Reply #22 on: June 13, 2015, 11:14:45 PM »
|
|
|
LAMBTS is disabled via a different mechanism on K04 factory tunes.
Make sure you test and fix this ...
 ?? |
|
|
|
|
Logged
|
|
|
|
fknbrkn
Hero Member
Karma: +186/-24
Offline
Posts: 1455
mk4 1.8T AUM
|
|
« Reply #23 on: August 28, 2015, 10:29:13 AM »
|
|
|
bump this thread same problem here  |
|
|
|
|
Logged
|
|
|
|
giles92
Full Member
Karma: +13/-3
Offline
Posts: 83
|
|
« Reply #24 on: August 28, 2015, 05:09:15 PM »
|
|
|
TABGBTS is the threshold to turn on BTS fueling and FBSTABGM is the multiplier that factors in bts fueling based on the egt model or actual egt. I think that the axis values of temperature on fbstabgm is higher on those K04s so its mostly inactive. You can use look at a non egt sensor file to see the difference. Maybe thats what he was getting at...?
|
|
|
|
|
Logged
|
|
|
|
|
prj
|
|
« Reply #25 on: August 29, 2015, 07:01:38 AM »
|
|
|
No.
|
|
|
|
|
Logged
|
|
|
|
|
sonique
|
|
« Reply #26 on: August 29, 2015, 01:46:12 PM »
|
|
|
prj say again big nothing  |
|
|
|
|
Logged
|
|
|
|
fknbrkn
Hero Member
Karma: +186/-24
Offline
Posts: 1455
mk4 1.8T AUM
|
|
« Reply #27 on: August 30, 2015, 02:26:33 AM »
|
|
|
yep
and this night i spent by comparing, ida tracing, changing, redbulling etc
but still has poor results like a directly switch to driver requested lamfa map and dont know about bts
|
|
|
|
|
Logged
|
|
|
|
giles92
Full Member
Karma: +13/-3
Offline
Posts: 83
|
|
« Reply #28 on: August 30, 2015, 06:08:51 AM »
|
|
|
TKATBTS
Temperature threshold for component protection near the catalytic converter
This value is maxed at 1229 in a tt225 wideband file im looking at. But in a 180 hp file it is at 100 degrees C.
I checked ATR ATM and lambts and thats all i could find that could disable the egt model from functioning. Is that it?
|
|
|
|
|
Logged
|
|
|
|
hansdevogel89
Newbie
Karma: +1/-0
Offline
Posts: 21
|
|
« Reply #29 on: August 30, 2015, 06:28:22 AM »
|
|
|
But as stated Catr needs to be set to 0 otherwise you get constant protection fuelling ( ie 0.75 all the time) Setting it 0 gives normal lambda fuelling as found in the Hn or Hj.
I have asked for s4wiki to be updated
where can i find these in 1.8t bam 8n0906018h files, are these the same adresses as mentioned in S4 wiki? CDATR (0x18196), CDATS (0x18197), CATR (0x192CA) |
|
|
|
|
Logged
|
|
|
|
|
