Pages: [1]
Author Topic: Which injectors to choose?  (Read 5497 times)
BlackCupra
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 24


« on: September 21, 2012, 01:11:50 PM »

I am currently looking into bigger injectors and am somehow struggeling which ones to use.

Two types are currently in "favorite" list:

http://www.ebay.com/itm/260932315346?item=260932315346&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

http://www.ebay.com/itm/250360777632?item=250360777632&viewitem=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

Both are 550cc, but first ones are EV1 which would have the advantage that I dont need electric connector adapters on 1.8T, the second ones are EV14 from which I read that they seem to be the more modern design, better injectors....

Those EV14 would also make an electric adapter necessary.

The red ones have a 30° cone spray angle.

The black ones 22.4°.

Are there any "real world" experiences with both of these injectors on 1.8T engines out there?

I need to order beginning of next week so its a "little" urgent..

Any hints highly appreciated :-)

BR, Alex
Logged
jdm ej1 95
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 52


« Reply #1 on: September 21, 2012, 05:44:09 PM »

ev14... and dont buy off ebay.

the adapters arent that big of a deal.. its literally a 1 inch long plastic piece.
Logged
BlackCupra
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 24


« Reply #2 on: September 22, 2012, 08:23:04 AM »

Thank you for your opinion :-)

Could you please clear up WHY you would choose EV14 and why not to buy from ebay?

(I think fiveOmotorsports is reputable....)

Best regards

Alex
Logged
RaraK
Hero Member
*****

Karma: +58/-2
Offline Offline

Posts: 539


« Reply #3 on: September 23, 2012, 06:27:10 AM »

Ebay......well there are "clone" injectors now being sold, made in china.  there are a TON of 630's and walbro pumps that are not genuine out on ebay.

You should really buy from a reputable reseller.

The ev14's are a more modern design, and are very easy to tune.  They are as smooth as OEM injectors with very little calibration. 
Logged
BlackCupra
Newbie
*

Karma: +2/-0
Offline Offline

Posts: 24


« Reply #4 on: September 23, 2012, 07:15:13 AM »

You think fiveOmotorsports sell chinese clone injectors?
Logged
zillarob
Full Member
***

Karma: +13/-1
Offline Offline

Posts: 152


« Reply #5 on: September 23, 2012, 10:04:03 AM »

8 of those injectors are like 225 straight from ford motorsorts.
I'd get those and keep for spares or sell 4 of them to offset cost.

iirc, M-9593-G302. Was another 35 for 8 adapters
Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #6 on: September 24, 2012, 08:01:23 PM »

Ev14's have proven to run like butter compared to the older injectors.  Better idle, easier to tune, consistent, simply just a much better injector.  I sell Bosch EV14's (550cc, 650cc, 750cc, 850cc, 1000cc [which I'm personally running on my B5 S4]) to forum folk, if you're interested shoot me a PM.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0s, 0q)