Pages: [1]
Author Topic: ME7.1 ECU: Where is Adresspin A18 of 28F800 connected?  (Read 4706 times)
passuff
Jr. Member
**

Karma: +3/-9
Offline Offline

Posts: 48


« on: September 28, 2012, 11:30:44 AM »

I doing a little research for building an ETK7 from EDC15C to ME7... The difference is that edc15 ecu has 29f400 flash and newer me7 has 29f800. The Adress pin A18 of  flash seems not be connected to the MCU C167 directly, like all other address pins. Does somebody know, whos responsible of switching the last addresspin on the ME7.1 pcb?
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503


« Reply #1 on: September 28, 2012, 12:05:49 PM »

Pin 2 I think.
Logged
passuff
Jr. Member
**

Karma: +3/-9
Offline Offline

Posts: 48


« Reply #2 on: September 28, 2012, 12:37:43 PM »

Pin 2 I think.

Thank you but this I knew before. I'm not after the flash itself I'm more after the connection between pin 2 and MCU.. If there even is one.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)