Pages: [1]
Author Topic: Audi A4 B5 1.8T  (Read 3736 times)
MADMARX
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: October 10, 2012, 11:51:16 AM »

Hi all

Wonder if anyone can help me with my audi A4 B5 1.8T 2000 model.


I have upgraded the standard turbo to a T3 turbo with internal wastgate and upgraded the standard injectors to Audi S3 injectors.

Now the car runs fine when cruising but as soon as i slam it down on the throttle it feels like the car is holding back or going into limp mode.


I have been looking at maybe flashing the ecu if that would help? and what file would be the best to use?

Oh i have disconnected all the sensors on the airbox, will that create a problem?

bring on the insults, im new to all of this lol.

Thx
Madmarx
Logged
byzan a4
Full Member
***

Karma: +0/-1
Offline Offline

Posts: 73


« Reply #1 on: November 10, 2012, 02:54:09 PM »

So you are running with no N80 and MAF and no tune at all on a t3 turbo of somekind ?
Logged
professor
Sr. Member
****

Karma: +25/-0
Offline Offline

Posts: 409



« Reply #2 on: November 11, 2012, 03:31:30 AM »

I ve done similar tuning on same car with early ME7.5 with narrowband.
It needs more caution while tuning the fueling and someone who knows should do it.

Without injectors calibration (you run 4bar with s3 injectors), with maf unplugged etc it really make me think once more that 20VT are very tough cars  Cheesy

Yes ecu remapping is needed and i dont think there is a ready file for your car to flash it right away. You know how to flash it? Those ecu may be stubborn with nefmoto tool.
Logged

Seat Ibiza MK4 Cupra 1.8t 20V, stg3.
"Those 1.8T 20V machines are really tough" ©
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)