NefMoto > Technical > Flashing and Chipping > edc15 lock ecu for reading
Pages: [1]
« previous next »
Author Topic: edc15 lock ecu for reading  (Read 8252 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« on: November 06, 2012, 03:17:00 PM »
please,how I lock ecu for reading tune via obd? edc15 and me7.5
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #1 on: November 06, 2012, 04:44:20 PM »
EDC15 not possible
Logged
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« Reply #2 on: November 07, 2012, 01:45:06 AM »
and me7.5?
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #3 on: November 07, 2012, 01:46:31 AM »
EDC15 is possible but you cannot write to it anymore afterwards, only in boot mode, so you have to be sure of what you are going to write to it.
Logged
I have no logs because I have a boost gauge (makes things easier)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184
« Reply #4 on: November 07, 2012, 02:07:22 AM »
Quote from: IamwhoIam on November 07, 2012, 01:46:31 AM
EDC15 is possible but you cannot write to it anymore afterwards, only in boot mode, so you have to be sure of what you are going to write to it.

I understand,and how to do it?(I think edc15)
Logged
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #5 on: November 07, 2012, 05:55:24 AM »
Quote from: IamwhoIam on November 07, 2012, 01:46:31 AM
EDC15 is possible but you cannot write to it anymore afterwards, only in boot mode, so you have to be sure of what you are going to write to it.

Please explain how?
Logged
prj
Hero Member
*****

Karma: +1072/-482
Offline Offline

Posts: 6039
« Reply #6 on: November 07, 2012, 06:48:53 AM »
I have not devoted too much time to diesel ECU's, but wasn't all the read/write functionality on EDC15 in the ROM?
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #7 on: November 07, 2012, 07:04:16 AM »
Correct, no way of stopping reading or writing with good tools.
Logged
ta79pr
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 103
« Reply #8 on: November 07, 2012, 07:22:34 AM »
I too have an EDC15 (98 Beetle TDI/ALH). It was chipped by a pro, but I really need to tweak a few parameters due to a nasty slow down shudder. It was my understanding (based on very little) that I had to unsolder the two chips and flash new ones in a jig and solder them back in (or solder in a chip socket)...
Logged
02 TT tdi (BEW)
2005 allroad 2.7tM (BEL)
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070
« Reply #9 on: November 07, 2012, 04:58:16 PM »
Quote from: matchew on November 07, 2012, 07:04:16 AM
Correct, no way of stopping reading or writing with good tools.

Keep searching, it IS possible Smiley
Logged
I have no logs because I have a boost gauge (makes things easier)
matchew
Hero Member
*****

Karma: +47/-22
Offline Offline

Posts: 503
« Reply #10 on: November 07, 2012, 04:59:59 PM »
Quote from: IamwhoIam on November 07, 2012, 04:58:16 PM
Keep searching, it IS possible Smiley

Not by changing anything in the flash file its not.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 28, 2024, 06:35:05 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)