Hello, peps!
I don't know if everyone knows this already but there's a way to unlock full control of VCDS adaptation channels (same thing as unisettings does, but without any additional soft). So, what do we have to do? Simple

1) Allow complete access without logins:
CWTAF = 16383 (dec)

2) Remove soft limits for all channels:
xxx_AUG to 00 and xxx_AOG to FF

Controlable channels:
01.Idle speed         
02.Fuel on increasing load         
03.Fuel on decreasing load         
04.Fuel enrichment on startup         
05.Fuel enrichment on warmup         
06.Lambda regulation speed         
07.Speed limit         
08.Secondary fuel enrichment         
09.Ignition timing         
10.Primary fuel enrichment         
11.--- (no EGR)         
12.Load scaling         
13.Idle speed control bits         
14.Idle torque         

Go and test it on VCDS or VAG-COM

P.S> Gonna update my me7 wizz with this info and add some additional info

VCDS or VAGCOM: ENGINE BLOCK -> ADAPTATION

Great info. Thank you.

Great post !

Could you detail which variable does each channel modify ?