NefMoto > Technical > Tuning > ECO tune
Pages: [1]
« previous next »
Author Topic: ECO tune  (Read 4640 times)
slowrider
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18
« on: November 26, 2012, 08:02:17 AM »
Since Im quite new to this and still learning..
I might ask some thing stuped but i´ll try to understand so please bear with me.

Questions:
Is it possible to tune ME7.5 to do save gas with the method of running half of the cylinders.
(Cut gas and spark on half of the cylinders)? Can the injectors and the spark be controlled by the ECU?

Are there any problems with this?
When you don´t need the power the ecu saves gas and serve when needed?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6038
« Reply #1 on: November 26, 2012, 08:32:23 AM »
No, this will not improve consumption! On contrary!

Read up a little bit on how cylinder deactivation works before you get crazy ideas Smiley
If you don't have V engine with adjustable camshaft timing or alternatively some very exotic hardware to manipulate only the valves on selected cylinders you can forget it altogether.
« Last Edit: November 26, 2012, 08:34:21 AM by prj » Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
slowrider
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 18
« Reply #2 on: November 27, 2012, 08:03:11 AM »
Thank you..

What about lean out cylinders?
Would that be any good?

I guess this would be possible but not a huge saver am I correct?
Logged
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6038
« Reply #3 on: November 27, 2012, 08:52:18 AM »
No, that would also be a waste of time.
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
ABCD
Full Member
***

Karma: +4/-0
Offline Offline

Posts: 78
« Reply #4 on: November 28, 2012, 02:46:06 AM »
all these ideas of urs would not do any good...because the amount of torque required to run you vehicle, would have to be compensated from getting more work from the firing cylinders, i.e. more throttle opening and more gas comsumption Smiley
Logged
B234R
Full Member
***

Karma: +11/-0
Offline Offline

Posts: 75
« Reply #5 on: November 28, 2012, 11:08:49 AM »
Not necessarily. Assuming that more throttle opening always increases consumption is wrong. Always being the keyword.
Throttling losses can be minimized, but as prj said it makes no sense on stock hardware where you can't control the valves directly on the deactivated cylinders.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 07:31:12 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.029 seconds with 18 queries. (Pretty URLs adds 0s, 0q)