Pages: 1 ... 4 5 [6]
Author Topic: Galletto software edited with PROPER ENGLISH  (Read 56403 times)
dream3R
Hero Member
*****

Karma: +14/-6
Offline Offline

Posts: 1202


« Reply #75 on: October 29, 2015, 11:20:15 AM »

I'll take a quick look
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
dream3R
Hero Member
*****

Karma: +14/-6
Offline Offline

Posts: 1202


« Reply #76 on: October 29, 2015, 11:24:08 AM »

Works fine for me with hexcom usb vagcom cable on windows 10 using the RT vcpi driver. Have not tried generic FTDI cable.

[does not work]

bump

Since we have ressurrected this thread... any chance some IDA pro experts can come up with a proper solution?

Thanks!

I can't find those bytes in the exe
Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
nyet
Administrator
Hero Member
*****

Karma: +385/-42
Online Online

Posts: 8791


WWW
« Reply #77 on: October 29, 2015, 11:27:01 AM »

Thanks!

I can't find those bytes in the exe

Galletto 1260 or 1250 (also, for clarity, I'm talking about removing serial checking, not windows 10 support heh)?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
dream3R
Hero Member
*****

Karma: +14/-6
Offline Offline

Posts: 1202


« Reply #78 on: October 29, 2015, 11:31:28 AM »

Galletto 1260 or 1250 (also, for clarity, I'm talking about removing serial checking, not windows 10 support heh)?


lol I was looking for the bytes not offset lol.  ok so it's not so easy it get's pushed on-to the stack twice.

I'll work on it when I can late here now.
« Last Edit: October 29, 2015, 12:02:37 PM by dream3R » Logged



How to work out values from an A2L Smiley

http://nefariousmotorsports.com/forum/index.php?topic=5525.msg52371#msg52371


Starting Rev's http://nefariousmotorsports.com/forum/index.php?topic=5397.msg51169#msg51169

noobs read this before asking http://nefariousmotorsports.com/forum/index.php?topic=9014.0title=


ORGORIGINAL 05 5120 creator for Volvo
ORIGINAL Datalogger (Freeware) Author
ORGINAL finder of the 'extra' torque' limits
I don't have ME7.01 A2L I just use ID
dgpb
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 162


« Reply #79 on: April 07, 2016, 11:19:43 AM »

First thing first: Thank you ddillinger for the OP



A week ago or so I wasn't able to read an ibiza cupra AQX 6k0906032 from a good friend with NMS. (I think putting a direct K-line would fix this issue)

So I downloaded this galletto exe and edited it to work with my KKL409.1.
It seems to work OK but I haven't tried to read the car yet.

But an important fact is that there isn't any me7 car when you select "seat". There are only edc.

Is there a way to update the ecu list?

Can I normal read/write it by selecting any other me7 29f400bb car?

Can I boot-mode read/write it by selecting any other me7 29f400bb car?
« Last Edit: April 07, 2016, 11:23:23 AM by diegogpb » Logged
ddillenger
Hero Member
*****

Karma: +614/-19
Offline Offline

Posts: 5647


« Reply #80 on: April 07, 2016, 03:04:45 PM »

This will only work in bootmode, and you can write any C16x ecu by selecting the appropriate memory layout. No need for the car to be listed.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
mikeb52
Full Member
***

Karma: +0/-0
Offline Offline

Posts: 99


« Reply #81 on: November 30, 2017, 09:44:55 AM »

Very helpful walkthrough.
Thanks for creating it..
Logged
rogosteve
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 20


« Reply #82 on: March 27, 2018, 11:24:26 AM »

Do I install drivers from this .rar or are my ftdi drivers I use with Nefmoto good?
Logged
Tetley
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #83 on: May 10, 2018, 05:01:45 AM »

Having a bit of a problem, tried this with a ebay spec INPA cable and it seemed to work. Now I've purchased a better built INPA cable from one stop electronics and it doesn't seem to work.
I've tried galletto drivers , automatic drivers and ones direct from FTDI.  I'll either receive a opening port impossible error or it'll just freeze up when IDing before giving loads of 0s

Any ideas where I'm going wrong?
Logged
nyet
Administrator
Hero Member
*****

Karma: +385/-42
Online Online

Posts: 8791


WWW
« Reply #84 on: May 10, 2018, 12:35:17 PM »

INPA cables will not work with Galletto afaik.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Tetley
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #85 on: May 13, 2018, 12:23:03 PM »

I had a cheapo INPA cable working just the more expensive one doesn't seem too
Logged
Tetley
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4


« Reply #86 on: May 16, 2018, 05:02:49 AM »

Or is there any ways of improving the reliability of 1260 cables?
Logged
Pages: 1 ... 4 5 [6]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 17 queries. (Pretty URLs adds 0s, 0q)