Pages: [1]
Author Topic: Audi A3 1.8T AUM 06A90032LM 0261207773 1037363059  (Read 4920 times)
boim
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 35


« on: January 27, 2013, 08:14:38 AM »

Hi All,

I am a super noob, I used the memory ME7 AM29F800 lay out to retrieve this .bin; need your advice whether I used the correct one.

This is from my car in Indonesia, Audi A3 2003 1.8T 150HP Tiptronic. I believe this is European model as the car was completely built up and imported from Germany.

Thank you very much in advance for your advice.

Regards,
Boim
Logged
airtite
Hero Member
*****

Karma: +13/-3
Offline Offline

Posts: 741


« Reply #1 on: January 27, 2013, 09:42:10 AM »

looks good

Checking file Audi_A3_1.8T_AUM_06A90032LM_0261207773_1037363059.bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4013.00//24B/Dst01o/160801//
-> Contents of ECUID data table:
   - '0261207773'         (SSECUHN)         
   - '1037363059'         (SSECUSN)         
   - '06A906032LM '       (VAG part number)
   - '0001'               (VAG sw number)   
   - '1.8L R4/5VT     '   (engine id)       
-> Contents of ECUID data table:
   - 'HW_MAN004'                           


-> No errors found. File is OK.   *********************
Logged
boim
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 35


« Reply #2 on: January 28, 2013, 10:12:27 PM »

Thanks so much. Then it save for others to use it whenever needed Smiley

Just additional info, I pull it using using KKL cable and Nefmoto software, after reading noob posts. Still looking for my spare times to move forward on this reading, tuning, flashing ecu.

Thanks again.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)