Pages: [1] 2 3
Author Topic: Bench flashing/VCDS cable for cluster (B5S4)  (Read 70468 times)
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« on: February 10, 2013, 03:14:11 PM »

Anybody have a good wiring diagram?

Do I only need k-line and power?

Attached is k-line tool (Thanks dd)
« Last Edit: March 28, 2013, 03:03:11 PM by nyet » Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
ddillenger
Moderator
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #1 on: February 10, 2013, 03:18:26 PM »

There are several pins that need power and ground, and one k-line. The pin numbers are visible inside the connectors, you might have to squint if you're getting old Smiley

Terminal 30 is constant, terminal 15 is switched. Terminal 31 is ground. For bench flashing just run all the 15's and 30's to 12v.





« Last Edit: February 10, 2013, 03:26:05 PM by ddillenger » Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #2 on: February 10, 2013, 03:41:38 PM »

k line and power only.

heres mine.





Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #3 on: February 10, 2013, 06:09:48 PM »

EXCELLENT. Thank you, as usual.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
keithwbloom
Jr. Member
**

Karma: +0/-1
Offline Offline

Posts: 43


« Reply #4 on: February 11, 2013, 06:28:41 PM »

Anybody have a good wiring diagram?

Do I only need k-line and power?

If you pull a few more of the sensor leads from the green connector to ground, you won't be too annoyed by excessive warnings while you go about your testing.

2000+:

Blue connector:
Pin:
1 - positive (12 volts) — solid black
7 - ground (earth) — solid brown
8 - ground (coolant temp) — blue with brown stripe
9 - ground (earth) — solid brown
22 - ground (coolant level) — blue with yellow stripe
23 - positive (12 volts) — red with blue stripe
24 - ground (earth) — solid brown
25 - K-line (connect to 7 on OBD connector) — green with white stripe
----------------------------------------------------------------

OBD connector:
Pin:
4 - ground — solid brown
5 - ground — solid brown
7- k-line — solid green
16 - positive (12 volts) — red with blue stripe

---------------------------------------------------------------

Green connector:
Pin:
28- k-line-green/green tracer

You can pair the powers/grounds and k-lines together (powers can get paired, grounds can get paired. Do not actually connect the powers/grounds to each other).



« Last Edit: March 10, 2013, 01:07:54 PM by nyet » Logged
jibberjive
Hero Member
*****

Karma: +23/-2
Offline Offline

Posts: 536


« Reply #5 on: February 15, 2013, 01:53:11 AM »

Nye, if you end up making a cluster harness like K0mpresed, I'll pay you to buy double the parts and make two, if you're interested.
Logged
mightemouce
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 67


« Reply #6 on: February 15, 2013, 09:04:33 AM »

This site is better and better everyday
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #7 on: February 15, 2013, 10:47:47 AM »

Nye, if you end up making a cluster harness like K0mpresed, I'll pay you to buy double the parts and make two, if you're interested.

right now i only have one donor car for the obd and cluster connectors... not planning on buying any connectors Smiley
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
chli1976
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 25


« Reply #8 on: February 16, 2013, 02:23:38 AM »

Anybody have a good wiring diagram?

Do I only need k-line and power?

Attached is k-line tool (Thanks dd)

What Interface i need for this soft? I have the 1.4 version, does this interface also run with this soft?
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #9 on: February 16, 2013, 08:14:34 AM »

Any kkl interface will work using this software. If you already have 1.4, then that interface should work fine.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
AARDQ
Sr. Member
****

Karma: +11/-0
Offline Offline

Posts: 338


« Reply #10 on: February 16, 2013, 01:40:51 PM »

Anybody have a good wiring diagram?

Do I only need k-line and power?

Attached is k-line tool (Thanks dd)

Anybody else's anti-virus reporting that the vag commander exe contains a virus?   
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #11 on: February 16, 2013, 01:43:52 PM »

There have been quite a few downloads and this is the first I've heard of it.

I scanned it with avast, avg, and norton and nothing.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
AARDQ
Sr. Member
****

Karma: +11/-0
Offline Offline

Posts: 338


« Reply #12 on: February 16, 2013, 01:47:08 PM »

There have been quite a few downloads and this is the first I've heard of it.

I scanned it with avast, avg, and norton and nothing.

Hmmm  OK, AVG is picking it up as a trojan.  Guess I'll create a restore point and press on...
Logged
cyril279
Full Member
***

Karma: +12/-2
Offline Offline

Posts: 140


« Reply #13 on: February 16, 2013, 02:14:55 PM »

There have been quite a few downloads and this is the first I've heard of it.

I scanned it with avast, avg, and norton and nothing.

Avira didn't like it at all, I ignored it and kept a close eye, and so far so good.
Logged
ddillenger
Moderator
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #14 on: February 16, 2013, 02:26:13 PM »

It's been on my netbook for over 2 years now and I haven't even gotten a hint of trouble. I keep AVG up to date, I find it gives me the least false positives.

I just scanned the @##$ out of the archive, then extracted and scanned everything individually with kaspersky, symantec and avg. All clear.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
Pages: [1] 2 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)